Interaction¶

A specific type of interaction object and a specific type of interaction state object are designed for each type of interaction. An interaction object stores the non-propagating data of an interaction as well as a number of instances of the corresponding interaction state object, each of which stores the propagating data of the interaction in a single step. Instances of the interaction state object are created and deleted internally by its corresponding interaction object.

Create interactions¶

class InteractionModel(

name,

description='',

stefanBoltzmann=None,

absoluteZero=None,

waveFormulation=NOT_SET,

modelType=STANDARD_EXPLICIT,

universalGas=None,

copyConstraints=1,

copyConnectors=1,

copyInteractions=1,

)[源代码]¶

基类：InteractionContactControlModel, InteractionContactInitializationModel, InteractionContactStabilizationModel, InteractionPropertyModel

Abaqus creates a Model object named Model-1 when a session is started.

备注

This object can be accessed by:

mdb.models[name]

备注

Check InteractionModel on help.3ds.com/2022.

Public Data Attributes:

Inherited from ModelBase

name	A String specifying the repository key.
stefanBoltzmann	None or a Float specifying the Stefan-Boltzmann constant.
absoluteZero	None or a Float specifying the absolute zero constant.
waveFormulation	A SymbolicConstant specifying the type of incident wave formulation to be used in acoustic problems.
universalGas	None or a Float specifying the universal gas constant.
noPartsInputFile	A Boolean specifying whether an input file should be written without parts and assemblies.
endRestartStep	A Boolean specifying that the step specified by restartStep should be terminated at the increment specified by restartIncrement.
shellToSolid	A Boolean specifying that a shell global model drives a solid submodel.
lastChangedCount	A Float specifying the time stamp that indicates when the model was last changed.
description	A String specifying the purpose and contents of the Model object.
restartJob	A String specifying the name of the job that generated the restart data.
restartStep	A String specifying the name of the step where the restart analysis will start.
globalJob	A String specifying the name of the job that generated the results for the global model.
copyConstraints	A boolean specifying the status of constraints created in a model, in the model which instances this model.
copyConnectors	A boolean specifying the status of connectors created in a model, in the model which instances this model.
copyInteractions	A boolean specifying the status of interactions created in a model, in the model which instances this model.
keywordBlock	A KeywordBlock object.
amplitudes	A repository of Amplitude objects.
profiles	A repository of Profile objects.
boundaryConditions	A repository of BoundaryCondition objects.
constraints	A repository of ConstrainedSketchConstraint objects.
analyticalFields	A repository of AnalyticalField objects.
discreteFields	A repository of DiscreteField objects.
predefinedFields	A repository of PredefinedField objects.
interactions	A repository of Interaction objects.
interactionProperties	A repository of InteractionProperty objects.
contactControls	A repository of ContactControl objects.
contactInitializations	A repository of ContactInitialization objects.
contactStabilizations	A repository of ContactStabilization objects.
linkedInstances	A tuple of tuples of Strings specifying the linked child PartInstance name in the current model to the corresponding parent PartInstance name in a different model.
linkedParts	A tuple of tuples of Strings specifying the linked child Part name in the current model to the corresponding parent Part name in a different model.
loads	A repository of Load objects.
materials	A repository of Material objects.
calibrations	A repository of Calibration objects.
sections	A repository of Section objects.
remeshingRules	A repository of RemeshingRule objects.
sketches	A repository of ConstrainedSketch objects.
parts	A repository of Part objects.
steps	A repository of Step objects.
featureOptions	A FeatureOptions object.
adaptiveMeshConstraints	A repository of AdaptiveMeshConstraint objects.
adaptiveMeshControls	A repository of AdaptiveMeshControl objects.
timePoints	A repository of TimePoint objects.
filters	A repository of Filter objects.
integratedOutputSections	A repository of IntegratedOutputSection objects.
fieldOutputRequests	A repository of FieldOutputRequest objects.
historyOutputRequests	A repository of HistoryOutputRequest objects.
optimizationTasks	A repository of OptimizationTask objects.
tableCollections	A repository of TableCollection objects.
eventSeriesTypes	A repository of EventSeriesType objects.
eventSeriesDatas	A repository of EventSeriesData objects.
restartIncrement	An Int specifying the increment, interval, iteration or cycle where the restart analysis will start.
rootAssembly	An Assembly object.

Public Methods:

contactDetection([name, createStepName, ...])	This method uses contact detection to create SurfaceToSurfaceContactStd, SurfaceToSurfaceContactExp, and Tie objects.
getSurfaceSeparation()	This method returns a list of all possible contacts that can be created using the ContactDetection method.
AcousticImpedance(name, createStepName, surface)	This method creates an AcousticImpedance object.
ActuatorSensor(name, createStepName, point, ...)	This method creates an ActuatorSensor object.
CavityRadiation(name, createStepName, surfaces)	This method creates a CavityRadiation object.
ConcentratedFilmCondition(name, ...[, ...])	This method creates a ConcentratedFilmCondition object.
ConcentratedRadiationToAmbient(name, ...[, ...])	This method creates a ConcentratedRadiationToAmbient object.
ContactExp(name, createStepName[, ...])	This method creates a ContactExp object.
ContactStd(name, createStepName[, ...])	This method creates a ContactStd object.
CyclicSymmetry(name, createStepName, main, ...)	This method creates a CyclicSymmetry object.
ElasticFoundation(name, createStepName, ...)	This method creates an ElasticFoundation object.
FilmCondition(name, createStepName, surface, ...)	This method creates a FilmCondition object.
FluidCavity(name, createStepName, ...[, ...])	This method creates an FluidCavity object.
FluidExchange(name, createStepName, ...[, ...])	This method creates an FluidExchange object.
FluidInflator(name, createStepName, cavity, ...)	This method creates a FluidInflator object.
IncidentWave(name, createStepName, ...[, ...])	This method creates an IncidentWave object.
ModelChange(name, createStepName[, ...])	This method creates a ModelChange object.
PressurePenetration(name, createStepName, ...)	This method creates a PressurePenetration object.
RadiationToAmbient(name, createStepName, ...)	This method creates a RadiationToAmbient object.
SelfContactExp(name, createStepName, ...[, ...])	This method creates a SelfContactExp object.
SelfContactStd(name, createStepName, ...[, ...])	This method creates a SelfContactStd object.
StdXplCosimulation(name, createStepName, region)	This method creates a StdXplCosimulation object.
SurfaceToSurfaceContactExp(name, ...[, ...])	This method creates a SurfaceToSurfaceContactExp object.
SurfaceToSurfaceContactStd(name, ...[, ...])	This method creates a SurfaceToSurfaceContactStd object.
XFEMCrackGrowth(name, createStepName, crackName)	This method creates an XFEMCrackGrowth object.

Inherited from InteractionContactControlModel

ExpContactControl(name[, globTrkChoice, ...])	This method creates an ExpContactControl object.
StdContactControl(name[, ...])	This method creates an StdContactControl object.

Inherited from InteractionContactInitializationModel

ExpInitialization(name[, overclosureType, ...])	This method creates an ExpInitialization object.
StdInitialization(name[, overclosureType, ...])	This method creates a StdInitialization object.

Inherited from InteractionContactStabilizationModel

StdStabilization(name[, zeroDistance, ...])

This method creates a StdStabilization object.

Inherited from InteractionPropertyModel

AcousticImpedanceProp(name, tableType, table)	This method creates an AcousticImpedanceProp object.
ActuatorSensorProp(name[, realProperties, ...])	This method creates an ActuatorSensorProp object.
CavityRadiationProp(name[, ...])	This method creates a CavityRadiationProp object.
ContactProperty(name)	This method creates a ContactProperty object.
FilmConditionProp(name[, ...])	This method creates a FilmConditionProp object.
FluidCavityProperty(name[, definition, ...])	This method creates a FluidCavityProperty object.
FluidExchangeProperty(name, dataTable[, ...])	This method creates a FluidExchangeProperty object.
FluidInflatorProperty(name, definition, ...)	This method creates a FluidInflatorProperty object.
IncidentWaveProperty(name[, definition, ...])	This method creates an IncidentWaveProperty object.

Inherited from ModelBase

__init__(name[, description, ...])	This method creates a Model object.
ModelFromInputFile(name, inputFileName)	This method creates a Model object by reading the keywords in an input file and creating the corresponding Abaqus/CAE objects.
ModelFromOdbFile(name, odbFileName)	This method creates a Model object by reading an output database and creating any corresponding Abaqus/CAE objects.
ModelFromNastranFile(modelName, inputFileName)	This method creates a Model object by reading the keywords in a Nastran bulk data file or Nastran input file and creating any corresponding Abaqus/CAE objects.
setValues([description, noPartsInputFile, ...])	This method modifies the Model object.

---

Member Details:

AcousticImpedance(

name,

createStepName,

surface,

definition=TABULAR,

interactionProperty='',

nonreflectingType=PLANE,

radius=1,

semimajorAxis=1,

eccentricity=0,

centerCoordinates=(),

directionCosine=(),

)[源代码]¶

This method creates an AcousticImpedance object.

备注

This function can be accessed by:

mdb.models[name].AcousticImpedance

备注

Check AcousticImpedance on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the AcousticImpedance object is created.

surface¶

A Region object specifying the acoustic boundary surface.

definition=TABULAR¶

A SymbolicConstant specifying the type of acoustic impedance to be defined. Possible values are TABULAR and NONREFLECTING. The default value is TABULAR.

interactionProperty=''¶

A String specifying the AcousticImpedanceProp object associated with this interaction.

nonreflectingType=PLANE¶

A SymbolicConstant specifying the type of nonreflecting geometry to be defined. Possible values are PLANE, IMPROVED, CIRCULAR, SPHERICAL, ELLIPTICAL, and PROLATE. The default value is PLANE.This argument is valid only when definition = NONREFLECTING.

radius=1¶

A Float specifying the radius of the circle or sphere defining the boundary surface. The default value is 1.0.This argument is valid only when definition = NONREFLECTING, and nonreflectingType = CIRCULAR or SPHERICAL.

semimajorAxis=1¶

A Float specifying the semimajor axis length of the ellipse or prolate spheroid defining the boundary surface. The default value is 1.0.This argument is valid only when definition = NONREFLECTING, and nonreflectingType = ELLIPTICAL or PROLATE.

eccentricity=0¶

A Float specifying the eccentricity of the ellipse or prolate spheroid defining the boundary surface. The default value is 0.0.This argument is valid only when definition = NONREFLECTING, and nonreflectingType = ELLIPTICAL or PROLATE.

centerCoordinates=()¶

A sequence of three Floats specifying the X, Y, and Z coordinates of the center of the ellipse or prolate spheroid defining the boundary surface. The default value is (0, 0, 0).This argument is valid only when definition = NONREFLECTING, and nonreflectingType = ELLIPTICAL or PROLATE.

directionCosine=()¶

A sequence of three Floats specifying the X, Y, and Z components of the direction cosine of the major axis of the ellipse or prolate spheroid defining the boundary surface. The default value is (0, 0, 1).This argument is valid only when definition = NONREFLECTING, and nonreflectingType = ELLIPTICAL or PROLATE.

返回:¶

An AcousticImpedance object.

返回类型:¶

AcousticImpedance

ActuatorSensor(

name,

createStepName,

point,

interactionProperty,

noCoordComponents,

unsymm,

noSolutionDepVar,

userSubUel,

dof,

solutionDepVars,

)[源代码]¶

This method creates an ActuatorSensor object.

备注

This function can be accessed by:

mdb.models[name].ActuatorSensor

备注

Check ActuatorSensor on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the actuator/sensor interaction is created. createStepName must be set to ‘Initial’.

point¶

A Region object specifying the point at which the constraint is applied.

interactionProperty¶

A String specifying the ActuatorSensorProp object associated with this interaction.

noCoordComponents¶

An Int specifying the number of coordinate components supplied to the user subroutine (UEL).

unsymm¶

A Boolean specifying whether the element matrices are symmetric (ON) or unsymmetric (OFF). The default value is OFF.

noSolutionDepVar¶

An Int specifying the number of solution-dependent variables. The default value is 0.

userSubUel¶

A String specifying the name of the user subroutine (UEL) that defines the user element.

dof¶

A String specifying the degrees of freedom, separated by commas.

solutionDepVars¶

A sequence of Floats specifying the initial values of the solution-dependent variables.

返回:¶

An ActuatorSensor object.

返回类型:¶

ActuatorSensor

CavityRadiation(

name,

createStepName,

surfaces,

surfaceEmissivities=(),

ambientTemp=None,

blocking=BLOCKING_ALL,

blockingSurfaces=None,

rangeOfView=None,

surfaceReflection=1,

viewfactorAccurTol=0,

minInfinitesimalRatio=64,

numPointsPerEdge=3,

minLumpedAreaDS=5,

cyclicSymmetry=0,

cyclicImages=2,

cyclicRotPt=None,

cyclicRotEndPt=None,

cyclicSymPt=None,

periodicSymmetries=0,

periodicImages_1=2,

periodicImages_2=2,

periodicImages_3=2,

periodicSymAxis_1='',

periodicSymAxis_2='',

periodicSymPlane_1='',

periodicSymPlane_2='',

periodicSymPlane_3='',

periodicDistance_1=(),

periodicDistance_2=(),

periodicDistance_3=(),

periodicSymZ=None,

periodicDistZ=None,

reflectionSymmetries=0,

reflectionSymAxis_1='',

reflectionSymAxis_2='',

reflectionSymPlane_1='',

reflectionSymPlane_2='',

reflectionSymPlane_3='',

reflectionSymZ=None,

)[源代码]¶

This method creates a CavityRadiation object.

备注

This function can be accessed by:

mdb.models[name].CavityRadiation

备注

Check CavityRadiation on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the cavity radiation interaction should be created.

surfaces¶

A RegionArray object specifying the surfaces for which radiation viewfactor control is being specified.

surfaceEmissivities=()¶

A sequence of Strings specifying the names of the Cavity Radiation properties containing the surface emissivity data. One name per specified surface. The emissivity data is ignored when surfaceReflection = OFF.

ambientTemp=None¶

None or a Float specifying the reference ambient temperature value, θ0θ0. Specifying a value indicates an open cavity. The default value is None.

blocking=BLOCKING_ALL¶

A SymbolicConstant specifying the blocking checks to be performed in the viewfactor calculations. Possible values are BLOCKING_ALL, NO_BLOCKING, and PARTIAL_BLOCKING. The default value is BLOCKING_ALL.

blockingSurfaces=None¶

A RegionArray object specifying the surfaces that provide blocking inside the cavity. This argument applies only when blocking = PARTIAL_BLOCKING.

rangeOfView=None¶

None or a Float specifying the maximum distance between surface facets at which viewfactors are calculated. More distant facets are deemed too far apart to exchange significant amounts of heat through radiation effects, and the viewfactors between these facets are assumed to be zero. If rangeOfView = None, there is no upper limit. The default value is None.

surfaceReflection=1¶

A Boolean specifying whether heat reflections are to be included in the cavity radiation calculations. The default value is ON.

viewfactorAccurTol=0¶

A Float specifying the acceptable tolerance for the viewfactor calculations. The default value is 0.05.

minInfinitesimalRatio=64¶

A Float specifying the facet area ratio above which the infinitesimal-to-finite area approximation is used for viewfactor calculations. The default value is 64.0.

numPointsPerEdge=3¶

An Int specifying the number of Gauss integration points to be used along each edge when the numerical integration of contour integrals is used for viewfactor calculations. One to five integration points are allowed. The default value is 3.

minLumpedAreaDS=5¶

A Float specifying the nondimensional distance-square value above which the lumped area approximation is used for viewfactor calculations. The default value is 5.0.

cyclicSymmetry=0¶

A Boolean specifying whether cyclic symmetry will be applied. This argument cannot be specified for axisymmetric models. The default value is OFF.

cyclicImages=2¶

An Int specifying the number of cyclically similar images that compose the cavity formed as a result of this symmetry. This argument applies only when cyclicSymmetry = ON. The default value is 2.

cyclicRotPt=None¶

A ModelDot object specifying the rotation axis point. This argument applies only when cyclicSymmetry = ON.

cyclicRotEndPt=None¶

A ModelDot object specifying the rotation axis end point. This argument applies only for three-dimensional models, and only when cyclicSymmetry = ON.

cyclicSymPt=None¶

A ModelDot object specifying the symmetry axis end point. This argument applies only when cyclicSymmetry = ON.

periodicSymmetries=0¶

An Int specifying the number of periodic symmetries that will be applied. The default value is 0.

periodicImages_1=2¶

An Int specifying the number of repetitions used in the numerical calculation of the cavity viewfactors resulting from the first periodic symmetry. The result of this symmetry is a cavity composed of the cavity surface defined in the model plus twice the value of periodicImages_1. This argument applies only when periodicSymmetries is greater than zero. The default value is 2.

periodicImages_2=2¶

An Int specifying the number of repetitions used in the numerical calculation of the cavity viewfactors resulting from the second periodic symmetry. The result of this symmetry is a cavity composed of the cavity surface defined in the model plus twice the value of periodicImages_2. This argument applies only when periodicSymmetries is greater than one. The default value is 2.

periodicImages_3=2¶

An Int specifying the number of repetitions used in the numerical calculation of the cavity viewfactors resulting from the third periodic symmetry. The result of this symmetry is a cavity composed of the cavity surface defined in the model plus twice the value of periodicImages_3. This argument applies only when periodicSymmetries = 3. The default value is 2.

periodicSymAxis_1=''¶

A straight Edge, a Datum object representing a datum axis, or an ElementEdge object indicating the first line of symmetry in two-dimensional models. This argument applies only for 2D models, and when periodicSymmetries is greater than zero.

periodicSymAxis_2=''¶

A straight Edge, a Datum object representing a datum axis, or an ElementEdge object indicating the second line of symmetry in two-dimensional models. This argument applies only for two-dimensional models, and when periodicSymmetries = 2.

periodicSymPlane_1=''¶

A planar Face, an ElementFace, or a Datum object representing a datum plane; indicating the first plane of symmetry in three-dimensional models. This argument applies only for three-dimensional models, and when periodicSymmetries is greater than zero.

periodicSymPlane_2=''¶

A planar Face, an ElementFace, or a Datum object representing a datum plane; indicating the second plane of symmetry in three-dimensional models. This argument applies only for three-dimensional models, and when periodicSymmetries is greater than one.

periodicSymPlane_3=''¶

A planar Face, an ElementFace, or a Datum object representing a datum plane; indicating the third plane of symmetry in three-dimensional models. This argument applies only for three-dimensional models, and when periodicSymmetries = 3.

periodicDistance_1=()¶

A sequence of sequences of Floats specifying the two points of the vector that describes the periodic distance for the first periodic symmetry. Each point is defined by a tuple of three coordinates indicating its position. This argument applies only when periodicSymmetries is greater than zero. The default value is an empty sequence.

periodicDistance_2=()¶

A sequence of sequences of Floats specifying the two points of the vector that describes the periodic distance for the second periodic symmetry. Each point is defined by a tuple of three coordinates indicating its position. This argument applies only when periodicSymmetries is greater than one. The default value is an empty sequence.

periodicDistance_3=()¶

A sequence of sequences of Floats specifying the two points of the vector that describes the periodic distance for the third periodic symmetry. Each point is defined by a tuple of three coordinates indicating its position. This argument applies only when periodicSymmetries = 3. The default value is an empty sequence.

periodicSymZ=None¶

None or a Float specifying the Z value indicating the symmetry reference line in axisymmetric models. This argument applies only for axisymmetric models, and when periodicSymmetries = 1. The default value is None.

periodicDistZ=None¶

None or a Float specifying the Z value indicating the periodic distance in axisymmetric models. This argument applies only for axisymmetric models, and when periodicSymmetries = 1. The default value is None.

reflectionSymmetries=0¶

An Int specifying the number of reflection symmetries will be applied. The default value is 0.

reflectionSymAxis_1=''¶

A straight Edge, a Datum object representing a datum axis, or an ElementEdge object indicating the first line of symmetry in two-dimensional models. This argument applies only for two-dimensional models, and when reflectionSymmetries is greater than zero.

reflectionSymAxis_2=''¶

A straight Edge, a Datum object representing a datum axis, or an ElementEdge object indicating the second line of symmetry in two-dimensional models. This argument applies only for two-dimensional models, and when reflectionSymmetries = 2.

reflectionSymPlane_1=''¶

A planar Face, an ElementFace, or a Datum object representing a datum plane; indicating the first plane of symmetry in three-dimensional models. This argument applies only for three-dimensional models, and when reflectionSymmetries is greater than zero.

reflectionSymPlane_2=''¶

A planar Face, an ElementFace, or a Datum object representing a datum plane; indicating the second plane of symmetry in three-dimensional models. This argument applies only for three-dimensional models, and when reflectionSymmetries is greater than one.

reflectionSymPlane_3=''¶

A planar Face, an ElementFace, or a Datum object representing a datum plane; indicating the third plane of symmetry in three-dimensional models. This argument applies only for three-dimensional models, and when reflectionSymmetries = 3.

reflectionSymZ=None¶

None or a Float specifying the Z value indicating the symmetry reference line in axisymmetric models. This argument applies only for axisymmetric models, and when reflectionSymmetries = 1. The default value is None.

返回:¶

A CavityRadiation object.

返回类型:¶

CavityRadiation

ConcentratedFilmCondition(

name,

createStepName,

region,

definition,

nodalArea=1,

explicitRegionType=LAGRANGIAN,

interactionProperty='',

field='',

sinkTemperature=0,

sinkAmplitude='',

filmCoeff=0,

filmCoeffAmplitude='',

sinkFieldName='',

sinkDistributionType=UNIFORM,

)[源代码]¶

This method creates a ConcentratedFilmCondition object.

备注

This function can be accessed by:

mdb.models[name].ConcentratedFilmCondition

备注

Check ConcentratedFilmCondition on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the ConcentratedFilmCondition object is created.

region¶

A Region object specifying the region to which the concentrated film condition interaction is applied. The interaction is applied to each node in the region.

definition¶

A SymbolicConstant specifying how the concentrated film condition is defined. Possible values are EMBEDDED_COEFF, PROPERTY_REF, USER_SUB, and FIELD.

nodalArea=1¶

A Float specifying the area associated with the node where the concentrated film condition is applied. The default value is 1.0.

explicitRegionType=LAGRANGIAN¶

A SymbolicConstant specifying how the concentrated film condition is applied to the boundary of an adaptive mesh domain. Possible values are LAGRANGIAN, SLIDING, and EULERIAN. The default value is LAGRANGIAN. This argument applies only during an Abaqus/Explicit analysis.

interactionProperty=''¶

A String specifying the name of the FilmConditionProp object associated with this interaction. The interactionProperty argument applies only when definition = PROPERTY_REF. The default value is an empty string.

field=''¶

A String specifying the name of the AnalyticalField object associated with this interaction. The field argument applies only when definition = FIELD. The default value is an empty string.

sinkTemperature=0¶

A Float specifying the reference sink temperature, θ0θ0. The default value is 0.0.

sinkAmplitude=''¶

A String specifying the name of the Amplitude object that gives the variation of the sink temperature, θ0θ0, with time. The default value is an empty string. Note: Use None in an Abaqus/Standard analysis to specify that the reference sink temperature is applied immediately at the beginning of the step or linearly over the step. Use None in an Abaqus/Explicit analysis to specify that the reference sink temperature is applied throughout the step.

filmCoeff=0¶

A Float specifying the reference film coefficient value, hh. The filmCoeff argument applies when definition = EMBEDDED_COEFF, definition = USER_SUB, or definition = FIELD. The default value is 0.0.

filmCoeffAmplitude=''¶

A String specifying the name of the Amplitude object that gives the variation of the film coefficient, hh, with time. The default value is an empty string. Note: Use None in an Abaqus/Standard analysis to specify that the reference film coefficient is applied immediately at the beginning of the step or linearly over the step. Use None in an Abaqus/Explicit analysis to specify that the reference film coefficient is applied throughout the step.

sinkFieldName=''¶

A String specifying the name of the AnalyticalField or DiscreteField object associated with the sink temperature. The sinkFieldName argument applies only when sinkDistributionType = ANALYTICAL_FIELD or sinkDistributionType = DISCRETE_FIELD. The default value is an empty string.

sinkDistributionType=UNIFORM¶

A SymbolicConstant specifying how the sink temperature is distributed. Possible values are UNIFORM, ANALYTICAL_FIELD, and DISCRETE_FIELD. The default value is UNIFORM.

返回:¶

A ConcentratedFilmCondition object.

返回类型:¶

ConcentratedFilmCondition

ConcentratedRadiationToAmbient(

name,

createStepName,

region,

ambientTemperature,

ambientTemperatureAmp,

emissivity,

nodalArea=1,

explicitRegionType=LAGRANGIAN,

field='',

distributionType=UNIFORM,

)[源代码]¶

This method creates a ConcentratedRadiationToAmbient object.

备注

This function can be accessed by:

mdb.models[name].ConcentratedRadiationToAmbient

备注

Check ConcentratedRadiationToAmbient on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the ConcentratedRadiationToAmbient object is created.

region¶

A Region object specifying the region to which the concentrated radiation interaction is applied. The interaction is applied to each node in the region.

ambientTemperature¶

A Float specifying the reference ambient temperature, θ0θ0.

ambientTemperatureAmp¶

A String specifying the name of the Amplitude object that gives the variation of the ambient temperature with time. Note: Use None in an Abaqus/Standard analysis to specify that the reference ambient temperature is applied immediately at the beginning of the step or linearly over the step. Use None in an Abaqus/Explicit analysis to specify that the reference ambient temperature is applied throughout the step.

emissivity¶

A Float specifying the emissivity, ϵϵ.

nodalArea=1¶

A Float specifying the area associated with the node where the concentrated radiation interaction is applied. The default value is 1.0.

explicitRegionType=LAGRANGIAN¶

A SymbolicConstant specifying how the concentrated radiation is applied to the boundary of an adaptive mesh domain. Possible values are LAGRANGIAN, SLIDING, and EULERIAN. The default value is LAGRANGIAN. Note: explicitRegionType applies only during an Abaqus/Explicit analysis.

field=''¶

A String specifying the name of the AnalyticalField object associated with this interaction. The field argument applies only when distributionType = ANALYTICAL_FIELD. The default value is an empty string.

distributionType=UNIFORM¶

A SymbolicConstant specifying how the radiation is defined. Possible values are UNIFORM and ANALYTICAL_FIELD. The default value is UNIFORM.

返回:¶

A ConcentratedRadiationToAmbient object.

返回类型:¶

ConcentratedRadiationToAmbient

ContactExp(

name,

createStepName,

useAllstar=0,

globalSmoothing=1,

includedPairs=None,

excludedPairs=None,

contactPropertyAssignments=None,

surfaceThicknessAssignments=None,

surfaceOffsetAssignments=None,

surfaceFeatureAssignments=None,

smoothingAssignments=None,

surfaceCrushTriggerAssignments=<abaqus.Interaction.SurfaceCrushTriggerAssignment.SurfaceCrushTriggerAssignment object>,

surfaceFrictionAssignments=<abaqus.Interaction.SurfaceFrictionAssignment.SurfaceFrictionAssignment object>,

mainSecondaryAssignments=None,

polarityAssignments=<abaqus.Interaction.PolarityAssignments.PolarityAssignments object>,

)[源代码]¶

This method creates a ContactExp object.

备注

This function can be accessed by:

mdb.models[name].ContactExp

备注

Check ContactExp on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which this contact interaction is created.

useAllstar : Union[AbaqusBoolean, bool], default: 0

A Boolean specifying whether the contacting surface pair consists of all exterior faces, shell edges, beam segments, analytical rigid surfaces, and, when applicable, Eulerian material surfaces.

globalSmoothing : Union[AbaqusBoolean, bool], default: 1

A Boolean specifying whether surface smoothing (geometric correction) is automatically applied to all eligible surfaces. The default value is ON.

includedPairs : RegionPairs | None, default: None

A RegionPairs object specifying the domain pairs included in contact.

excludedPairs : RegionPairs | None, default: None

A RegionPairs object specifying the domain pairs excluded from contact.

contactPropertyAssignments : ContactPropertyAssignment | None, default: None

A ContactPropertyAssignment object specifying the contact property assignments in the contact domain.

surfaceThicknessAssignments : SurfaceThicknessAssignment | None, default: None

A SurfaceThicknessAssignment object specifying the surface thickness assignments in the contact domain.

surfaceOffsetAssignments : SurfaceOffsetAssignment | None, default: None

A SurfaceOffsetAssignment object specifying the surface offset fraction assignments in the contact domain.

surfaceFeatureAssignments : SurfaceFeatureAssignment | None, default: None

A SurfaceFeatureAssignment object specifying the surface feature angle assignments in the contact domain.

smoothingAssignments : SmoothingAssignment | None, default: None

A SmoothingAssignment object specifying the surface smoothing assignments in the contact domain.

surfaceCrushTriggerAssignments : SurfaceCrushTriggerAssignment, default: <abaqus.Interaction.SurfaceCrushTriggerAssignment.SurfaceCrushTriggerAssignment object at 0x7f2aedf91350>

A SurfaceCrushTriggerAssignment object specifying the surface crush trigger assignments in the contact domain.

Added in version 2021: The surfaceCrushTriggerAssignments argument was added.

surfaceFrictionAssignments : SurfaceFrictionAssignment, default: <abaqus.Interaction.SurfaceFrictionAssignment.SurfaceFrictionAssignment object at 0x7f2aedf93210>

A SurfaceFrictionAssignment object specifying the surface friction assignments in the contact domain.

Added in version 2021: The surfaceFrictionAssignments argument was added.

mainSecondaryAssignments : MainSecondaryAssignment | None, default: None

A MainSecondaryAssignment object specifying the main-secondary assignments in the contact domain.

在 2022 版本发生变更: The argument masterSlaveAssignments was renamed to mainSecondaryAssignments.

polarityAssignments : PolarityAssignments, default: <abaqus.Interaction.PolarityAssignments.PolarityAssignments object at 0x7f2aedfec590>

A PolarityAssignments object specifying the polarity assignments in the contact domain.

Added in version 2020: The polarityAssignments argument was added.

返回:¶

A ContactExp object.

返回类型:¶

ContactExp

ContactStd(

name,

createStepName,

useAllstar=0,

globalSmoothing=1,

includedPairs=None,

excludedPairs=None,

contactPropertyAssignments=None,

surfaceThicknessAssignments=None,

surfaceOffsetAssignments=None,

surfaceFeatureAssignments=None,

surfaceBeamSmoothingAssignments=<abaqus.Interaction.SurfaceBeamSmoothingAssignment.SurfaceBeamSmoothingAssignment object>,

surfaceVertexCriteriaAssignments=<abaqus.Interaction.SurfaceVertexCriteriaAssignment.SurfaceVertexCriteriaAssignment object>,

slidingFormulationAssignments=None,

mainSecondaryAssignments=None,

initializationAssignments=None,

stabilizationAssignments=None,

smoothingAssignments=None,

slidingTransitionAssignments=None,

)[源代码]¶

This method creates a ContactStd object.

备注

This function can be accessed by:

mdb.models[name].ContactStd

备注

Check ContactStd on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which this contact interaction is created.

useAllstar : Union[AbaqusBoolean, bool], default: 0

A Boolean specifying whether the contacting surface pairs consist of all exterior faces in the model.

globalSmoothing : Union[AbaqusBoolean, bool], default: 1

A Boolean specifying whether surface smoothing (geometric correction) is automatically applied to all eligible surfaces. The default value is ON.

includedPairs : RegionPairs | None, default: None

A RegionPairs object specifying the domain pairs included in contact.

excludedPairs : RegionPairs | None, default: None

A RegionPairs object specifying the domain pairs excluded from contact.

contactPropertyAssignments : ContactPropertyAssignment | None, default: None

A ContactPropertyAssignment object specifying the contact property assignments in the contact domain.

surfaceThicknessAssignments : SurfaceThicknessAssignment | None, default: None

A SurfaceThicknessAssignment object specifying the surface thickness assignments in the contact domain.

surfaceOffsetAssignments : SurfaceOffsetAssignment | None, default: None

A SurfaceOffsetAssignment object specifying the surface offset fraction assignments in the contact domain.

surfaceFeatureAssignments : SurfaceFeatureAssignment | None, default: None

A SurfaceFeatureAssignment object specifying the surface feature angle assignments in the contact domain.

surfaceBeamSmoothingAssignments : SurfaceBeamSmoothingAssignment, default: <abaqus.Interaction.SurfaceBeamSmoothingAssignment.SurfaceBeamSmoothingAssignment object at 0x7f2aee095b90>

A SurfaceBeamSmoothingAssignment object specifying the surface beam smoothing assignments in the contact domain.

Added in version 2021: The surfaceBeamSmoothingAssignments argument was added.

surfaceVertexCriteriaAssignments : SurfaceVertexCriteriaAssignment, default: <abaqus.Interaction.SurfaceVertexCriteriaAssignment.SurfaceVertexCriteriaAssignment object at 0x7f2aedfbec90>

A SurfaceVertexCriteriaAssignment object specifying the surface vertex criteria assignments in the contact domain.

Added in version 2021: The surfaceVertexCriteriaAssignments argument was added.

slidingFormulationAssignments : Optional[Sequence[SlidingFormulationAssignment]], default: None

A sequence of tuples of SlidingFormulationAssignment specifying the sliding formulation assignments. Each tuple contains two entries:

• A region object or the SymbolicConstant GLOBAL specifying the surface to which the sliding formulation attribute is assigned.

• A SymbolicConstant specifying the overriding the smoothness value to be used for the first surface. Possible values of the SymbolicConstant are NONE and SMALL_SLIDING.

Added in version 2021: The slidingFormulationAssignments argument was added.

mainSecondaryAssignments : MainSecondaryAssignment | None, default: None

A MainSecondaryAssignment object specifying the main-secondary assignments in the contact domain.

在 2022 版本发生变更: The argument masterSlaveAssignments was renamed to mainSecondaryAssignments.

initializationAssignments : InitializationAssignment | None, default: None

An InitializationAssignment object specifying the contact initialization assignments in the contact domain.

stabilizationAssignments : StabilizationAssignment | None, default: None

A StabilizationAssignment object specifying the contact stabilization assignments in the contact domain.

smoothingAssignments : SmoothingAssignment | None, default: None

A SmoothingAssignment object specifying the surface smoothing assignments in the contact domain.

slidingTransitionAssignments : SlidingTransitionAssignment | None, default: None

A SlidingTransitionAssignments object specifying the sliding transition assignments in the contact domain.

返回:¶

A ContactStd object.

返回类型:¶

ContactStd

CyclicSymmetry(

name,

createStepName,

main,

secondary,

repetitiveSectors,

axisPoint1,

axisPoint2,

extractedNodalDiameter=ALL_NODAL_DIAMETER,

lowestNodalDiameter=0,

highestNodalDiameter=0,

excitationNodalDiameter=0,

adjustTie=1,

positionTolerance=0,

positionToleranceMethod=COMPUTED_TOLERANCE,

)[源代码]¶

This method creates a CyclicSymmetry object.

备注

This function can be accessed by:

mdb.models[name].CyclicSymmetry

备注

Check CyclicSymmetry on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the cyclic symmetry interaction should be created.

main¶

A Region object specifying the main surface.

在 2022 版本发生变更: The argument master was renamed to main.

secondary¶

A Region object specifying the secondary surface.

在 2022 版本发生变更: The argument slave was renamed to secondary.

repetitiveSectors¶

An Int specifying the total number of sectors in the cyclic symmetric model.

axisPoint1¶

A Region object specifying the first point of the axis of symmetry. The region should contain exactly one mesh node, vertex, interesting point, reference point, or datum point. In a two-dimensional model axisPoint1 is the only point used to define the axis of symmetry.

axisPoint2¶

A Region object specifying the second point of the axis of symmetry. The region should contain exactly one mesh node, vertex, interesting point, reference point, or datum point. This point is ignored in a two-dimensional model.

extractedNodalDiameter=ALL_NODAL_DIAMETER¶

A SymbolicConstant specifying whether Abaqus should extract all possible nodal diameters or the nodal diameters between the user-specified values for lowestNodalDiameter and highestNodalDiameter. Possible values are ALL_NODAL_DIAMETER and SPECIFIED_NODAL_DIAMETER. The default value is ALL_NODAL_DIAMETER.

lowestNodalDiameter=0¶

An Int specifying the lowest nodal diameter to be used in the eigenfrequency analysis. The default value is 0.

highestNodalDiameter=0¶

An Int specifying the highest nodal diameter to be used in the eigenfrequency analysis. This argument value should be less than or equal to the half of the total number of sectors (as specified in the repetitiveSectors parameter). The default value is 0.

excitationNodalDiameter=0¶

An Int specifying the nodal diameter for which the modal-based steady-state dynamic analysis will be performed. This value should be greater than or equal to the lowest nodal diameter (specified in the lowestNodalDiameter parameter), and less than or equal to the highest nodal diameter (specified in the highestNodalDiameter parameter). The default value is 0.

adjustTie=1¶

A Boolean specifying whether or not to adjust the secondary surface of the cyclic symmetry to tie it to the main surface. The default value is ON.

positionTolerance=0¶

A Float specifying the position tolerance. The*positionTolerance* argument applies only when positionToleranceMethod = SPECIFY_TOLERANCE. The default value is 0.0.

positionToleranceMethod=COMPUTED_TOLERANCE¶

A SymbolicConstant specifying the method used to determine the position tolerance. Possible values are COMPUTED_TOLERANCE and SPECIFY_TOLERANCE. The default value is COMPUTED_TOLERANCE.

返回:¶

A CyclicSymmetry object.

返回类型:¶

CyclicSymmetry

ElasticFoundation(name, createStepName, surface, stiffness)[源代码]¶

This method creates an ElasticFoundation object.

备注

This function can be accessed by:

mdb.models[name].ElasticFoundation

备注

Check ElasticFoundation on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the ElasticFoundation object is created. createStepName must be set to ‘Initial’.

surface¶

A Region object specifying the surface to which the foundation applies.

stiffness¶

A Float specifying the foundation stiffness per area (or per length for beams).

返回:¶

An ElasticFoundation object.

返回类型:¶

ElasticFoundation

FilmCondition(

name,

createStepName,

surface,

definition,

interactionProperty='',

sinkTemperature=0,

sinkAmplitude='',

filmCoeff=0,

filmCoeffAmplitude='',

field='',

sinkFieldName='',

sinkDistributionType=UNIFORM,

)[源代码]¶

This method creates a FilmCondition object.

备注

This function can be accessed by:

mdb.models[name].FilmCondition

备注

Check FilmCondition on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the FilmCondition object is created.

surface¶

A Region object specifying the name of the surface to which the film condition interaction is applied.

definition¶

A SymbolicConstant specifying how the film condition is defined. Possible values are EMBEDDED_COEFF, PROPERTY_REF, USER_SUB, and FIELD.

interactionProperty=''¶

A String specifying the name of the FilmConditionProp object associated with this interaction. The interactionProperty argument applies only when definition = PROPERTY_REF. The default value is an empty string.

sinkTemperature=0¶

A Float specifying the reference sink temperature, θ0θ0. The default value is 0.0.

sinkAmplitude=''¶

A String specifying the name of the Amplitude object that gives the variation of the sink temperature, θ0θ0, with time. The default value is an empty string. Note: Use empty string in an Abaqus/Standard analysis to specify that the reference sink temperature is applied immediately at the beginning of the step or linearly over the step. Use empty string in an Abaqus/Explicit analysis to specify that the reference sink temperature is applied throughout the step.

filmCoeff=0¶

A Float specifying the reference film coefficient value, hh. The filmCoeff argument applies when definition = EMBEDDED_COEFF, definition = USER_SUB, or definition = FIELD. The default value is 0.0.

filmCoeffAmplitude=''¶

A String specifying the name of the Amplitude object that gives the variation of the film coefficient, hh, with time. The default value is an empty string. Note: Use empty string in an Abaqus/Standard analysis to specify that the reference film coefficient is applied immediately at the beginning of the step or linearly over the step. Use empty string in an Abaqus/Explicit analysis to specify that the reference film coefficient is applied throughout the step.

field=''¶

A String specifying the name of the AnalyticalField object associated with this interaction. The field argument applies only when definition = FIELD. The default value is an empty string.

sinkFieldName=''¶

A String specifying the name of the AnalyticalField or DiscreteField object associated with the sink temperature. The sinkFieldName argument applies only when sinkDistributionType = ANALYTICAL_FIELD or sinkDistributionType = DISCRETE_FIELD. The default value is an empty string.

sinkDistributionType=UNIFORM¶

A SymbolicConstant specifying how the sink temperature is distributed. Possible values are UNIFORM, ANALYTICAL_FIELD, and DISCRETE_FIELD. The default value is UNIFORM.

返回:¶

A FilmCondition object.

返回类型:¶

FilmCondition

FluidCavity(

name,

createStepName,

cavityPoint,

cavitySurface,

interactionProperty,

ambientPressure=0,

thickness=1,

useAdiabatic=0,

checkNormals=1,

)[源代码]¶

This method creates an FluidCavity object.

备注

This function can be accessed by:

mdb.models[name].FluidCavity

备注

Check FluidCavity on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the FluidCavity object is created.

cavityPoint¶

A Region object specifying the fluid cavity reference point.

cavitySurface¶

A Region object specifying the surface forming the boundary of the fluid cavity.

interactionProperty¶

A String specifying the FluidCavityProperty object associated with this interaction.

ambientPressure=0¶

A Float specifying the magnitude of the ambient pressure. The default value is 0.0.

thickness=1¶

A Float specifying the out-of-plane thickness of the surface for two-dimensional models. This argument is valid only when using two-dimensional models. The default value is 1.0.

useAdiabatic=0¶

A Boolean specifying whether adiabatic behavior is assumed for the ideal gas. This argument is valid only when interactionProperty specifies a pneumatic definition. The default value is OFF.

checkNormals=1¶

A Boolean specifying whether the analysis will check the consistency of the surface normals. The default value is ON.

返回:¶

A FluidCavity object.

返回类型:¶

FluidCavity

FluidExchange(

name,

createStepName,

firstCavity,

interactionProperty,

definition=TO_ENVIRONMENT,

secondCavity='',

exchangeArea=1,

)[源代码]¶

This method creates an FluidExchange object.

备注

This function can be accessed by:

mdb.models[name].FluidExchange

备注

Check FluidExchange on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the FluidExchange object is created.

firstCavity¶

A String specifying the first FluidCavity object associated with this interaction. This will be the only cavity specified if definition = TO_ENVIRONMENT.

interactionProperty¶

A String specifying the FluidExchangeProperty object associated with this interaction.

definition=TO_ENVIRONMENT¶

A SymbolicConstant specifying the type of fluid exchange to be defined. Possible values are TO_ENVIRONMENT and BETWEEN_CAVITIES. The default value is TO_ENVIRONMENT.

secondCavity=''¶

A String specifying the second FluidCavity object associated with this interaction. This argument is applicable only when definition = BETWEEN_CAVITIES.

exchangeArea=1¶

A Float specifying the effective exchange area. The default value is 1.0.

返回:¶

A FluidExchange object.

返回类型:¶

FluidExchange

FluidInflator(

name,

createStepName,

cavity,

interactionProperty,

inflationTimeAmplitude='',

massFlowAmplitude='',

)[源代码]¶

This method creates a FluidInflator object.

备注

This function can be accessed by:

mdb.models[name].FluidInflator

Added in version 2019: The FluidInflator method was added.

备注

Check FluidInflator on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the FluidInflator object is created.

cavity¶

A String specifying the first FluidCavity object associated with this interaction.

interactionProperty¶

A String specifying the FluidInflatorProperty object associated with this interaction.

inflationTimeAmplitude=''¶

A string specifying the name of the amplitude curve defining a mapping between the inflation time and the actual time.

massFlowAmplitude=''¶

A string specifying the name of the amplitude curve by which to modify the mass flow rate.

返回:¶

A FluidInflator object.

IncidentWave(

name,

createStepName,

sourcePoint,

standoffPoint,

surface,

interactionProperty,

definition=PRESSURE,

amplitude='',

imaginaryAmplitude='',

surfaceNormal=(),

initialDepth=None,

referenceMagnitude=None,

detonationTime=None,

magnitudeFactor=1,

)[源代码]¶

This method creates an IncidentWave object.

备注

This function can be accessed by:

mdb.models[name].IncidentWave

备注

Check IncidentWave on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the IncidentWave object is created.

sourcePoint¶

A Region object specifying the incident wave source point.

standoffPoint¶

A Region object specifying the incident wave standoff point.This argument is not valid when definition = CONWEP.

surface¶

A Region object specifying the surface defining the incident wave interaction. In problems involving fluid/surface boundaries, both the fluid surface and the solid surface comprising the boundary must have an incident wave interaction specified.

interactionProperty¶

A String specifying the IncidentWaveProperty object associated with this interaction.

definition=PRESSURE¶

A SymbolicConstant specifying the type of incident wave to be defined. The value must be PRESSURE for linear perturbation steps. An Explicit step is required when the value is set to CONWEP. Possible values are PRESSURE, ACCELERATION, UNDEX, and CONWEP. The default value is PRESSURE.

amplitude=''¶

A String specifying the name of the Amplitude object that defines the fluid pressure time history at the standoff point, if definition = PRESSURE. If definition = ACCELERATION, then this string specifies the name of the Amplitude object that defines the fluid particle acceleration time history at the standoff point. This member can be specified only if definition = PRESSURE or ACCELERATION. The default value is an empty string.

imaginaryAmplitude=''¶

A String specifying the name of the Amplitude object that defines the imaginary component of the fluid pressure time history at the standoff point. This member is applicable only for linear perturbation steps and if definition = PRESSURE. The default value is an empty string.

surfaceNormal=()¶

A sequence of three Floats specifying the X, Y, and Z components of the direction cosine of the fluid surface normal.This argument is valid only when definition = UNDEX.

initialDepth=None¶

None or a Float specifying the initial depth of the UNDEX bubble. The default value is None.This argument is valid only when definition = UNDEX.

referenceMagnitude=None¶

A Float specifying the reference magnitude.This argument is not valid when definition = CONWEP.

detonationTime=None¶

A Float specifying the time of detonation, given in total time.This argument is valid only when definition = CONWEP.

magnitudeFactor=1¶

A Float specifying the magnitude scale factor. The default value is 1.0.This argument is valid only when definition = CONWEP.

返回:¶

An IncidentWave object.

返回类型:¶

IncidentWave

ModelChange(

name,

createStepName,

isRestart=0,

regionType=GEOMETRY,

region=None,

activeInStep=0,

includeStrain=0,

)[源代码]¶

This method creates a ModelChange object.

备注

This function can be accessed by:

mdb.models[name].ModelChange

备注

Check ModelChange on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the ModelChange object is created.

isRestart=0¶

A Boolean specifying whether this interaction is being used solely to indicate that model change may be required in a subsequent restart analysis (either for elements or contact pairs). The default value is OFF.

regionType=GEOMETRY¶

A SymbolicConstant specifying the region selection type. This argument is valid only when isRestart = False. Possible values are GEOMETRY, SKINS, STRINGERS, and ELEMENTS. The default value is GEOMETRY.

region=None¶

A Region object specifying the elements to be removed or reactivated. This argument is valid only when isRestart = False.

activeInStep=0¶

A Boolean specifying whether elements are being removed or reactivated. This argument is valid only when isRestart = False. The default value is OFF.

includeStrain=0¶

A Boolean specifying whether stress/displacement elements are reactivated with strain. This argument is valid only when isRestart = False and when activeInStep = True. The default value is OFF.

返回:¶

A ModelChange object.

返回类型:¶

ModelChange

PressurePenetration(

name,

createStepName,

contactInteraction,

mainPoints,

secondaryPoints,

penetrationPressure,

criticalPressure,

amplitude=UNSET,

penetrationTime=0,

)[源代码]¶

This method creates a PressurePenetration object.

备注

This function can be accessed by:

mdb.models[name].PressurePenetration

备注

Check PressurePenetration on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the PressurePenetration object is created.

contactInteraction¶

A String specifying the name of the Surface-to-surface contact (Standard) interaction.

mainPoints¶

A RegionArray object specifying the points on the main surface that are exposed to the fluid.

在 2022 版本发生变更: The argument masterPoints was renamed to mainPoints.

secondaryPoints¶

A RegionArray object specifying the points on the secondary surface that are exposed to the fluid.

在 2022 版本发生变更: The argument slavePoints was renamed to secondaryPoints.

penetrationPressure¶

A tuple of Floats specifying the fluid pressure magnitude. For steady state dynamic analyses, a tuple of Complexes specifying the fluid pressure magnitude.

criticalPressure¶

A tuple of Floats specifying the critical contact pressure below which fluid penetration starts to occur.

amplitude=UNSET¶

A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

penetrationTime=0¶

A Float specifying the fraction of the current step time over which the fluid pressure on newly penetrated contact surface segments is ramped up to the current magnitude. The default value is 0.001.

返回:¶

A PressurePenetration object.

返回类型:¶

PressurePenetration

RadiationToAmbient(

name,

createStepName,

surface,

emissivity,

field='',

distributionType=UNIFORM,

radiationType=AMBIENT,

ambientTemperature=0,

ambientTemperatureAmp='',

)[源代码]¶

This method creates a RadiationToAmbient object.

备注

This function can be accessed by:

mdb.models[name].RadiationToAmbient

备注

Check RadiationToAmbient on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the RadiationToAmbient object is created.

surface¶

A Region object specifying the surface to which the radiation interaction is applied.

emissivity¶

A Float specifying the emissivity, ϵϵ.

field=''¶

A String specifying the name of the AnalyticalField object associated with this interaction. The field argument applies only when distributionType = ANALYTICAL_FIELD. The default value is an empty string.

distributionType=UNIFORM¶

A SymbolicConstant specifying how the radiation is distributed. This argument applies only when radiationType = AMBIENT. Possible values are UNIFORM and ANALYTICAL_FIELD. The default value is UNIFORM.

radiationType=AMBIENT¶

A SymbolicConstant specifying whether to use the default surface radiation behavior, or the cavity radiation approximation. Possible values are AMBIENT and CAVITY. The default value is AMBIENT.

ambientTemperature=0¶

A Float specifying the reference ambient temperature, θ0θ0. This argument applies only when radiationType = AMBIENT. The default value is 0.0.

ambientTemperatureAmp=''¶

A String specifying the name of the Amplitude object that gives the variation of the ambient temperature with time. Note: Use None in an Abaqus/Standard analysis to specify that the reference ambient temperature is applied immediately at the beginning of the step or linearly over the step. Use None in an Abaqus/Explicit analysis to specify that the reference ambient temperature is applied throughout the step. This argument applies only when radiationType = AMBIENT.

返回:¶

A RadiationToAmbient object.

返回类型:¶

RadiationToAmbient

SelfContactExp(

name,

createStepName,

surface,

interactionProperty,

mechanicalConstraint=KINEMATIC,

contactControls='',

)[源代码]¶

This method creates a SelfContactExp object.

备注

This function can be accessed by:

mdb.models[name].SelfContactExp

备注

Check SelfContactExp on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the SelfContactExp object is created.

surface¶

A Region object specifying the surface where self-contact is defined.

interactionProperty¶

A String specifying the name of the ContactProperty object associated with this interaction.

mechanicalConstraint=KINEMATIC¶

A SymbolicConstant specifying the mechanical constraint formulation. Possible values are KINEMATIC and PENALTY. The default value is KINEMATIC.

contactControls=''¶

A String specifying the name of the ContactControl object associated with this interaction. An empty string indicates that the default contact controls will be used. The default value is an empty string.

返回:¶

A SelfContactExp object.

返回类型:¶

SelfContactExp

SelfContactStd(

name,

createStepName,

surface,

interactionProperty,

enforcement=SURFACE_TO_SURFACE,

thickness=1,

smooth=0,

contactControls='',

)[源代码]¶

This method creates a SelfContactStd object.

备注

This function can be accessed by:

mdb.models[name].SelfContactStd

备注

Check SelfContactStd on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the SelfContactStd object is created.

surface¶

A Region object specifying the surface where self-contact is defined.

interactionProperty¶

A String specifying the name of the ContactProperty object associated with this interaction.

enforcement=SURFACE_TO_SURFACE¶

A SymbolicConstant specifying the discretization method. Possible values are NODE_TO_SURFACE and SURFACE_TO_SURFACE. The default value is SURFACE_TO_SURFACE.

thickness=1¶

A Boolean specifying whether shell/membrane element thickness is considered. The default value is ON.This argument in valid only when enforcement = SURFACE_TO_SURFACE.

smooth=0¶

A Float specifying the degree of smoothing used for deformable or rigid main surfaces involved when enforcement = NODE_TO_SURFACE. The value given must lie between 0.0 and 0.5. The default value is 0.2.

在 2022 版本发生变更: Rigid master surfaces was changed to rigid main surfaces.

contactControls=''¶

A String specifying the name of the ContactControl object associated with this interaction. An empty string indicates that the default contact controls will be used. The default value is an empty string.

返回:¶

A SelfContactStd object.

返回类型:¶

SelfContactStd

StdXplCosimulation(

name,

createStepName,

region,

incrementation=ALLOW_SUBCYCLING,

stepSize=0,

stepSizeDefinition=DEFAULT,

)[源代码]¶

This method creates a StdXplCosimulation object.

备注

This function can be accessed by:

mdb.models[name].StdXplCosimulation

备注

Check StdXplCosimulation on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the StdXplCosimulation object is created.

region¶

A Region object specifying the import and export region upon which the co-simulation exchanges data with the coupled analysis program.

incrementation=ALLOW_SUBCYCLING¶

A SymbolicConstant specifying whether the analysis programs use the same time increments or one is allowed to use more time increments than the other before exchanging data. Possible values are ALLOW_SUBCYCLING and LOCKSTEP. The default value is ALLOW_SUBCYCLING.

stepSize=0¶

A Float specifying the size of the increments to be used by Abaqus/Standard and Abaqus/Explicit. The default value is 0.0.

stepSizeDefinition=DEFAULT¶

A SymbolicConstant specifying whether the increment size is the analysis default or a supplied variable. Possible values are DEFAULT and SPECIFIED. The default value is DEFAULT.

返回:¶

A StdXplCosimulation object.

返回类型:¶

StdXplCosimulation

SurfaceToSurfaceContactExp(

name,

createStepName,

main,

secondary,

sliding,

interactionProperty,

mechanicalConstraint=KINEMATIC,

weightingFactorType=DEFAULT,

weightingFactor=0,

contactControls='',

initialClearance=OMIT,

halfThreadAngle=None,

pitch=None,

majorBoltDiameter=COMPUTED,

meanBoltDiameter=COMPUTED,

datumAxis=None,

useReverseDatumAxis=0,

clearanceRegion=None,

)[源代码]¶

This method creates a SurfaceToSurfaceContactExp object.

备注

This function can be accessed by:

mdb.models[name].SurfaceToSurfaceContactExp

备注

Check SurfaceToSurfaceContactExp on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the SurfaceToSurfaceContactExp object is created.

main¶

A Region object specifying the main surface.

在 2022 版本发生变更: The argument master was renamed to main.

secondary¶

A Region object specifying the secondary surface.

在 2022 版本发生变更: The argument slave was renamed to secondary.

sliding¶

A SymbolicConstant specifying the contact formulation. Possible values are FINITE and SMALL.

interactionProperty¶

A String specifying the name of the ContactProperty object associated with this interaction.

mechanicalConstraint=KINEMATIC¶

A SymbolicConstant specifying the mechanical constraint formulation. Possible values are KINEMATIC and PENALTY. The default value is KINEMATIC.

weightingFactorType=DEFAULT¶

A SymbolicConstant specifying the weighting for node-to-face contact. Possible values are DEFAULT and SPECIFIED. The default value is DEFAULT.

weightingFactor=0¶

A Float specifying the weighting factor for the contact surfaces when weightingFactorType = SPECIFIED. The default value is 0.0.

contactControls=''¶

A String specifying the name of the ContactControl object associated with this interaction. An empty string indicates that the default contact controls will be used. The default value is an empty string.

initialClearance=OMIT¶

A SymbolicConstant or a Float specifying the initial clearance at regions of contact. Possible values are OMIT and COMPUTED. The default value is OMIT.

halfThreadAngle=None¶

None or a sequence of Floats specifying the half thread angle used for bolt clearance. The default value is None.

pitch=None¶

None or a sequence of Floats specifying the pitch used for bolt clearance. The default value is None.

majorBoltDiameter=COMPUTED¶

The SymbolicConstant COMPUTED or a Float specifying the major diameter of the bolt used for bolt clearance. The default value is COMPUTED.

meanBoltDiameter=COMPUTED¶

The SymbolicConstant COMPUTED or a Float specifying the mean diameter of the bolt used for bolt clearance. The default value is COMPUTED.

datumAxis=None¶

A DatumAxis object specifying the orientation of the bolt hole when specifying bolt clearance.

useReverseDatumAxis=0¶

A Boolean specifying whether to reverse the bolt clearance direction given by the datum axis. The default value is OFF.

clearanceRegion=None¶

A Region object specifying the contact region for which clearance is specified.

返回:¶

A SurfaceToSurfaceContactExp object.

返回类型:¶

SurfaceToSurfaceContactExp

SurfaceToSurfaceContactStd(

name,

createStepName,

main,

secondary,

sliding,

interactionProperty,

interferenceType=NONE,

overclosure=0,

interferenceDirectionType=COMPUTED,

direction=(),

amplitude='',

smooth=0,

hcrit=0,

extensionZone=0,

adjustMethod=NONE,

adjustTolerance=0,

adjustSet=None,

enforcement=SURFACE_TO_SURFACE,

thickness=1,

contactControls='',

tied=0,

initialClearance=OMIT,

halfThreadAngle=None,

pitch=None,

majorBoltDiameter=COMPUTED,

meanBoltDiameter=COMPUTED,

datumAxis=None,

useReverseDatumAxis=0,

clearanceRegion=None,

surfaceSmoothing=NONE,

bondingSet=None,

handedness=RIGHT,

normalAdjustment=None,

)[源代码]¶

This method creates a SurfaceToSurfaceContactStd object.

备注

This function can be accessed by:

mdb.models[name].SurfaceToSurfaceContactStd

备注

Check SurfaceToSurfaceContactStd on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the SurfaceToSurfaceContactStd object is created.

main¶

A Region object specifying the name of the main surface.

在 2022 版本发生变更: The master argument was renamed to main.

secondary¶

A Region object specifying the name of the secondary surface.

在 2022 版本发生变更: The slave argument was renamed to secondary.

sliding¶

A SymbolicConstant specifying the contact formulation. Possible values are FINITE and SMALL.

interactionProperty¶

A String specifying the name of the ContactProperty object associated with this interaction.

interferenceType=NONE¶

A SymbolicConstant specifying the type of time-dependent allowable interference for contact pairs and contact elements. Possible values are:

• NONE, specifying no allowable contact interference.

• SHRINK_FIT.

• UNIFORM.

The default value is NONE.

overclosure=0¶

A Float specifying the maximum overclosure distance allowed. This argument applies only when interferenceType = UNIFORM. The default value is 0.0.

interferenceDirectionType=COMPUTED¶

A SymbolicConstant specifying the method used to determine the interference direction. Possible values are COMPUTED and DIRECTION_COSINE. The default value is COMPUTED.

direction=()¶

A sequence of three Floats specifying the following:

• XX-direction cosine of the interference direction vector.

• YY-direction cosine of the interference direction vector.

• ZZ-direction cosine of the interference direction vector.

This argument is required only when interferenceDirectionType = DIRECTION_COSINE.

amplitude=''¶

A String specifying the name of the amplitude curve that defines the magnitude of the prescribed interference during the step. Use None to specify that the prescribed interference is applied immediately at the beginning of the step and ramped down to zero linearly over the step.

smooth=0¶

A Float specifying the degree of smoothing used for deformable or rigid main surfaces involved when enforcement = NODE_TO_SURFACE. The value given must lie between 0.0 and 0.5. The default value is 0.2.

hcrit=0¶

A Float specifying the distance by which a secondary node must penetrate the main surface before Abaqus/Standard abandons the current increment and tries again with a smaller increment. The default value is 0.0.

extensionZone=0¶

A Float specifying a fraction of the end segment or facet edge length by which the main surface is to be extended to avoid numerical round-off errors associated with contact modeling. The value given must lie between 0.0 and 0.2. The default value is 0.1.

adjustMethod=NONE¶

A SymbolicConstant specifying the adjust method. Possible values are NONE, OVERCLOSED, TOLERANCE, and SET. The default value is NONE.

adjustTolerance=0¶

A Float specifying the adjust tolerance. The default value is 0.0.

adjustSet=None¶

A Region object specifying the Set object to which the adjustment is to be applied.

enforcement=SURFACE_TO_SURFACE¶

A SymbolicConstant specifying the discretization method. Possible values are NODE_TO_SURFACE and SURFACE_TO_SURFACE. The default value is SURFACE_TO_SURFACE.

thickness=1¶

A Boolean specifying whether shell/membrane element thickness is considered. The default value is ON.This argument is not valid when sliding = FINITE and enforcement = NODE_TO_SURFACE.

contactControls=''¶

A String specifying the name of the ContactControl object associated with this interaction. The empty string indicates that the default contact controls will be used. The default value is an empty string.

tied=0¶

A Boolean specifying whether the surfaces are to be “tied” together for the duration of the simulation. The default value is OFF.

initialClearance=OMIT¶

A SymbolicConstant or a Float specifying the initial clearance at regions of contact. Possible values are OMIT and COMPUTED. The default value is OMIT.

halfThreadAngle=None¶

None or a sequence of Floats specifying the half thread angle used for bolt clearance. The default value is None.

pitch=None¶

None or a sequence of Floats specifying the pitch used for bolt clearance. The default value is None.

majorBoltDiameter=COMPUTED¶

The SymbolicConstant COMPUTED or a Float specifying the major diameter of the bolt used for bolt clearance. The default value is COMPUTED.

meanBoltDiameter=COMPUTED¶

The SymbolicConstant COMPUTED or a Float specifying the mean diameter of the bolt used for bolt clearance. The default value is COMPUTED.

datumAxis=None¶

A DatumAxis object specifying the orientation of the bolt hole when specifying bolt clearance.

useReverseDatumAxis=0¶

A Boolean specifying whether to reverse the bolt clearance direction given by the datum axis. The default value is OFF.

clearanceRegion=None¶

A Region object specifying the contact region for which clearance is specified.

surfaceSmoothing=NONE¶

A SymbolicConstant specifying whether to use surface smoothing for geometric surfaces in SurfaceToSurfaceContactStd interactions. Possible values are AUTOMATIC and NONE. The default value is NONE.

bondingSet=None¶

A Region object specifying the secondary node sub-set for bonding, used only when the contact property CohesiveBehavior option specifies use.

handedness=RIGHT¶

A SymbolicConstant specifying the bolt handedness formulation. Possible values are RIGHT and LEFT. The default value is RIGHT.

Added in version 2019: The normalAdjustment argument was added.

normalAdjustment=None¶

A SymbolicConstant specifying the bolt normal adjustment formulation for all secondary nodes. Possible values are UNIFORM AXIAL COMPONENT and LOCATION DEPENDENT. The default value is UNIFORM AXIAL COMPONENT.

Added in version 2019: The normalAdjustment argument was added.

返回:¶

A SurfaceToSurfaceContactStd object.

返回类型:¶

SurfaceToSurfaceContactStd

XFEMCrackGrowth(name, createStepName, crackName, allowGrowth=1)[源代码]¶

This method creates an XFEMCrackGrowth object.

备注

This function can be accessed by:

mdb.models[name].XFEMCrackGrowth

备注

Check XFEMCrackGrowth on help.3ds.com/2022.

参数:¶

name¶

A String specifying the repository key.

createStepName¶

A String specifying the name of the step in which the XFEMCrackGrowth object is created.

crackName¶

A String specifying the XFEMCrack object associated with this interaction.

allowGrowth=1¶

A Boolean specifying whether the crack is allowed to grow (propagate) during this analysis step. The default value is ON.

返回:¶

A XFEMCrackGrowth object.

返回类型:¶

XFEMCrackGrowth

contactDetection(

name='',

createStepName='',

searchDomain=MODEL,

defaultType=CONTACT,

interactionProperty='',

separationTolerance=None,

extendByAngle=20,

mergeWithinAngle=20,

searchSingleInstances=0,

nameEachSurfaceFound=1,

createUnionOfMainSurfaces=0,

createUnionOfSecondarySurfaces=0,

createUnionOfMainSecondarySurfaces=0,

includePlanar=1,

includeCylindricalSphericalToric=1,

includeSplineBased=1,

includeMeshSolid=1,

includeMeshShell=1,

includeMeshMembrane=0,

includeOverclosed=1,

includeNonOverlapping=0,

meshedGeometrySearchTechnique=USE_GEOMETRY,

useShellThickness=1,

surfaceSmoothing=None,

)[源代码]¶

This method uses contact detection to create SurfaceToSurfaceContactStd, SurfaceToSurfaceContactExp, and Tie objects.

备注

Check InteractionModel.contactDetection on help.3ds.com/2022.

参数:¶

name=''¶

A String specifying the prefix used to generate repository keys. The default value is “CP-”

createStepName=''¶

A String specifying the name of the step in which the SurfaceToSurfaceContactStd, SurfaceToSurfaceContactExp, and Tie objects are created. The default value is “Initial.”

searchDomain=MODEL¶

A SymbolicConstant MODEL or a sequence of Strings specifying the names of instances to search. MODEL indicates the whole model is searched. The default value is MODEL.

defaultType=CONTACT¶

A SymbolicConstant specifying the default type of object to create. Possible values are CONTACT, CONTACT_STANDARD, CONTACT_EXPLICIT, and TIE. If CONTACT is used, the behavior is determined by the type of Step in the model. If an ExplicitDynamicsStep or TempDisplacementDynamicsStep exists, then SurfaceToSurfaceContactExp is created by default. Otherwise SurfaceToSurfaceContactStd is created by default. The default value is CONTACT.

interactionProperty=''¶

A String specifying the name of the ContactProperty object associated with any interactions created.

separationTolerance=None¶

A Float specifying the maximum separation for considering two surfaces to be candidates for contact, where separation is the maximum distance between the points of closest approach on the two surfaces. The default value is a function of the model.

extendByAngle=20¶

None or a Float specifying the angle for extending surface definitions to include adjacent faces. The default value is 20.

mergeWithinAngle=20¶

None or a Float specifying the angle for merging adjacent contact pairs that lie within the angle. The default value is 20.

searchSingleInstances=0¶

A Boolean specifying whether to include surface pairs within a single instance. The default value is OFF.

nameEachSurfaceFound=1¶

A Boolean specifying whether to assign a name to each surface found. The default value is ON.

createUnionOfMainSurfaces=0¶

A Boolean specifying whether to create a surface that is the union of all main surfaces found. The default value is OFF.

在 2022 版本发生变更: The argument createUnionOfMasterSurfaces was renamed to createUnionOfMainSurfaces.

createUnionOfSecondarySurfaces=0¶

A Boolean specifying whether to create a surface that is the union of all secondary surfaces found. The default value is OFF.

在 2022 版本发生变更: The argument createUnionOfSlaveSurfaces was renamed to createUnionOfSecondarySurfaces.

createUnionOfMainSecondarySurfaces=0¶

A Boolean specifying whether to create a surface that is the union of all main and secondary surfaces found. The default value is OFF.

在 2022 版本发生变更: The argument createUnionOfMasterSlaveSurfaces was renamed to createUnionOfMainSecondarySurfaces.

includePlanar=1¶

A Boolean specifying whether to include planar geometry. The default value is ON.

includeCylindricalSphericalToric=1¶

A Boolean specifying whether to include cylindrical, spherical, and toric geometry. The default value is ON.

includeSplineBased=1¶

A Boolean specifying whether to include spline-based geometry. The default value is ON.

includeMeshSolid=1¶

A Boolean specifying whether to include solid mesh entities. The default value is ON.

includeMeshShell=1¶

A Boolean specifying whether to include shell mesh entities. The default value is ON.

includeMeshMembrane=0¶

A Boolean specifying whether to include mesh membrane entities. The default value is OFF.

includeOverclosed=1¶

A Boolean specifying whether to include overclosed pairs. The default value is ON.

includeNonOverlapping=0¶

A Boolean specifying whether to include opposing geometry surfaces that do not overlap. The default value is OFF.

meshedGeometrySearchTechnique=USE_GEOMETRY¶

A SymbolicConstant USE_GEOMETRY or USE_MESH specifying whether to locate pairs in meshed geometry using the geometric entities or mesh entities. The default value is USE_GEOMETRY.

useShellThickness=1¶

A Boolean specifying whether to account for shell thickness and offset during contact detection. The default value is ON.

surfaceSmoothing=None¶

A SymbolicConstant specifying whether to use surface smoothing for geometric surfaces in SurfaceToSurfaceContactStd interactions. Possible values are NONE and AUTOMATIC. The default value isAUTOMATIC.

返回类型:¶

None.

getSurfaceSeparation()[源代码]¶

This method returns a list of all possible contacts that can be created using the ContactDetection method.

返回:¶

Tuple of tuples, where each tuple holds information, to be used in contact creation as follows:

• A string specifying the name of the main surface used in contact.

• A string specifying the name of the secondary surface used in contact.

• A float specifying the separation distance between the main surface and the secondary surface.

• A boolean specifying whether or not contact surfaces are overclosed.

返回类型:¶

tuple[tuple[str, str, float, bool]]

class InteractionContactControlModel(

name,

description='',

stefanBoltzmann=None,

absoluteZero=None,

waveFormulation=NOT_SET,

modelType=STANDARD_EXPLICIT,

universalGas=None,

copyConstraints=1,

copyConnectors=1,

copyInteractions=1,

)[源代码]¶

基类：ModelBase

Public Data Attributes:

Inherited from ModelBase

name	A String specifying the repository key.
stefanBoltzmann	None or a Float specifying the Stefan-Boltzmann constant.
absoluteZero	None or a Float specifying the absolute zero constant.
waveFormulation	A SymbolicConstant specifying the type of incident wave formulation to be used in acoustic problems.
universalGas	None or a Float specifying the universal gas constant.
noPartsInputFile	A Boolean specifying whether an input file should be written without parts and assemblies.
endRestartStep	A Boolean specifying that the step specified by restartStep should be terminated at the increment specified by restartIncrement.
shellToSolid	A Boolean specifying that a shell global model drives a solid submodel.
lastChangedCount	A Float specifying the time stamp that indicates when the model was last changed.
description	A String specifying the purpose and contents of the Model object.
restartJob	A String specifying the name of the job that generated the restart data.
restartStep	A String specifying the name of the step where the restart analysis will start.
globalJob	A String specifying the name of the job that generated the results for the global model.
copyConstraints	A boolean specifying the status of constraints created in a model, in the model which instances this model.
copyConnectors	A boolean specifying the status of connectors created in a model, in the model which instances this model.
copyInteractions	A boolean specifying the status of interactions created in a model, in the model which instances this model.
keywordBlock	A KeywordBlock object.
amplitudes	A repository of Amplitude objects.
profiles	A repository of Profile objects.
boundaryConditions	A repository of BoundaryCondition objects.
constraints	A repository of ConstrainedSketchConstraint objects.
analyticalFields	A repository of AnalyticalField objects.
discreteFields	A repository of DiscreteField objects.
predefinedFields	A repository of PredefinedField objects.
interactions	A repository of Interaction objects.
interactionProperties	A repository of InteractionProperty objects.
contactControls	A repository of ContactControl objects.
contactInitializations	A repository of ContactInitialization objects.
contactStabilizations	A repository of ContactStabilization objects.
linkedInstances	A tuple of tuples of Strings specifying the linked child PartInstance name in the current model to the corresponding parent PartInstance name in a different model.
linkedParts	A tuple of tuples of Strings specifying the linked child Part name in the current model to the corresponding parent Part name in a different model.
loads	A repository of Load objects.
materials	A repository of Material objects.
calibrations	A repository of Calibration objects.
sections	A repository of Section objects.
remeshingRules	A repository of RemeshingRule objects.
sketches	A repository of ConstrainedSketch objects.
parts	A repository of Part objects.
steps	A repository of Step objects.
featureOptions	A FeatureOptions object.
adaptiveMeshConstraints	A repository of AdaptiveMeshConstraint objects.
adaptiveMeshControls	A repository of AdaptiveMeshControl objects.
timePoints	A repository of TimePoint objects.
filters	A repository of Filter objects.
integratedOutputSections	A repository of IntegratedOutputSection objects.
fieldOutputRequests	A repository of FieldOutputRequest objects.
historyOutputRequests	A repository of HistoryOutputRequest objects.
optimizationTasks	A repository of OptimizationTask objects.
tableCollections	A repository of TableCollection objects.
eventSeriesTypes	A repository of EventSeriesType objects.
eventSeriesDatas	A repository of EventSeriesData objects.
restartIncrement	An Int specifying the increment, interval, iteration or cycle where the restart analysis will start.
rootAssembly	An Assembly object.

Public Methods:

ExpContactControl(name[, globTrkChoice, ...])	This method creates an ExpContactControl object.
StdContactControl(name[, ...])	This method creates an StdContactControl object.

Inherited from ModelBase

__init__(name[, description, ...])	This method creates a Model object.
ModelFromInputFile(name, inputFileName)	This method creates a Model object by reading the keywords in an input file and creating the corresponding Abaqus/CAE objects.
ModelFromOdbFile(name, odbFileName)	This method creates a Model object by reading an output database and creating any corresponding Abaqus/CAE objects.
ModelFromNastranFile(modelName, inputFileName)	This method creates a Model object by reading the keywords in a Nastran bulk data file or Nastran input file and creating any corresponding Abaqus/CAE objects.
setValues([description, noPartsInputFile, ...])	This method modifies the Model object.

---

Member Details:

ExpContactControl(

name,

globTrkChoice=DEFAULT,

globTrkInc=None,

fastLocalTrk=1,

scalePenalty=1,

warpCheckPeriod=20,

warpCutoff=20,

)[源代码]¶

This method creates an ExpContactControl object.

备注

This function can be accessed by:

mdb.models[name].ExpContactControl

备注

Check ExpContactControl on help.3ds.com/2022.

参数:¶

name¶

A String specifying the contact controls repository key.

globTrkChoice=DEFAULT¶

A SymbolicConstant specifying whether or not the default value will be used for the maximum number of increments between global contact searches. Possible values are DEFAULT and SPECIFY. The default value is DEFAULT.

globTrkInc=None¶

An Int specifying the maximum number of increments between global contact searches. The globTrkInc argument applies only when globTrkChoice = SPECIFY. The default value is 100 for surface-to-surface contact and 4 for self-contact.

fastLocalTrk=1¶

A Boolean specifying whether to use the more computationally efficient local tracking method. The default value is ON.

scalePenalty=1¶

A Float specifying the factor by which Abaqus/Explicit will scale the default penalty stiffness to obtain the stiffnesses used for the penalty contact pairs. The default value is 1.0.

warpCheckPeriod=20¶

An Int specifying the number of increments between checks for highly warped facets on main surfaces. The default value is 20.

warpCutoff=20¶

A Float specifying the out-of-plane warping angle (in degrees), at which a facet will be considered to be highly warped. The default value is 20.0.

返回:¶

An ExpContactControl object.

返回类型:¶

ExpContactControl

抛出:¶

RangeError –

StdContactControl(

name,

stiffnessScaleFactor=1,

penetrationTolChoice=RELATIVE,

relativePenetrationTolerance=None,

absolutePenetrationTolerance=None,

frictionOnset=None,

automaticTolerances=0,

maxchp=0,

perrmx=0,

uerrmx=0,

stabilizeChoice=NONE,

dampFactor=1,

dampCoef=0,

tangFraction=1,

eosFraction=0,

zeroDampingChoice=COMPUTE,

zeroDamping=None,

enforceWithLagrangeMultipliers=DEFAULT,

)[源代码]¶

This method creates an StdContactControl object.

备注

This function can be accessed by:

mdb.models[name].StdContactControl

备注

Check StdContactControl on help.3ds.com/2022.

参数:¶

name¶

A String specifying the contact controls repository key.

stiffnessScaleFactor=1¶

A Float specifying the factor by which Abaqus/Standard will scale the default penalty stiffness to obtain the stiffnesses used for the contact pairs. Only contact interactions defined with augmented Lagrangian surface behavior will be affected by this argument. The default value is 1.0.

penetrationTolChoice=RELATIVE¶

A SymbolicConstant specifying whether the allowable penetration is an absolute value or a value relative to the characteristic contact surface face dimension. Only contact interactions defined with augmented Lagrangian surface behavior will be affected by this argument. Possible values are RELATIVE and ABSOLUTE. The default value is RELATIVE.

relativePenetrationTolerance=None¶

A Float specifying the ratio of the allowable penetration to the characteristic contact surface face dimension. The float values represent percentages (e.g.: 0.001=0.1%). Only contact interactions defined with augmented Lagrangian surface behavior will be affected by this argument. The default value is 10⁻³.The relativePenetrationTolerance argument applies only when penetrationTolChoice = RELATIVE. The relativePenetrationTolerance and absolutePenetrationTolerance arguments are mutually exclusive.

absolutePenetrationTolerance=None¶

None or a Float specifying the allowable penetration. Only contact interactions defined with augmented Lagrangian surface behavior will be affected by this argument. The absolutePenetrationTolerance argument applies only when penetrationTolChoice = ABSOLUTE. The relativePenetrationTolerance and absolutePenetrationTolerance arguments are mutually exclusive. The default value is None.

frictionOnset=None¶

A SymbolicConstant specifying when the application of friction occurs. Possible values are:

• IMMEDIATE, specifying the friction is included in the increment when contact occurs.

• DELAYED, specifying the application of friction is delayed until the increment after contact occurs.

automaticTolerances=0¶

A Boolean specifying whether Abaqus/Standard should automatically compute an overclosure tolerance and a separation tolerance to prevent chattering in contact. The default value is OFF.The automaticTolerances argument cannot be used with the maxchp, perrmx, and uerrmx arguments.

maxchp=0¶

An Int specifying the maximum number of points that are permitted to violate contact conditions in any increment. The default value is 0.Either the perrmx or the uerrmx argument must be specified in conjunction with the maxchp argument.

perrmx=0¶

A Float specifying the maximum value of tensile stress (tensile force in GAP- or ITT-type contact elements) allowed to be transmitted at a contact point. The default value is 0.0.The perrmx argument must be specified in conjunction with the maxchp argument.

uerrmx=0¶

A Float specifying the maximum overclosure distance allowed at a secondary node that is considered to be open. The default value is 0.0.The uerrmx argument must be specified in conjunction with the maxchp argument.

在 2022 版本发生变更: Slave node was changed to secondary node.

stabilizeChoice=NONE¶

A SymbolicConstant specifying whether or not viscous damping will be specified, and if so, how it will be specified. Possible values are NONE, AUTOMATIC, and COEFFICIENT. The default value is NONE.

dampFactor=1¶

A Float specifying the value of the damping factor. This value is multiplied by the calculated damping coefficient. The default value is 1.0.This argument is only valid when stabilizeChoice = AUTOMATIC.

dampCoef=0¶

A Float specifying the damping coefficient. The default value is 0.0.This argument is only valid when stabilizeChoice = COEFFICIENT.

tangFraction=1¶

A Float specifying the tangential stabilization as a fraction of the normal stabilization (damping). The default value is 1.0.This argument is valid only if stabilizeChoice = AUTOMATIC or COEFFICIENT.

eosFraction=0¶

A Float specifying the fraction of the damping that remains at the end of the step. The default value is 0.0.This argument is valid only if stabilizeChoice = AUTOMATIC or COEFFICIENT.

zeroDampingChoice=COMPUTE¶

A SymbolicConstant specifying how the zero-damping clearance will be specified. Possible values are COMPUTE and SPECIFY. The default value is COMPUTE.This argument is valid only if stabilizeChoice = AUTOMATIC or COEFFICIENT.

zeroDamping=None¶

None or a Float specifying the clearance at which damping becomes zero. This argument is valid only when zeroDampingChoice = SPECIFY. This argument is valid only if stabilizeChoice = AUTOMATIC or COEFFICIENT. The default value is None.

enforceWithLagrangeMultipliers=DEFAULT¶

A SymbolicConstant specifying whether to enforce the contact constraints with Lagrange multipliers. Possible values are DEFAULT, ENFORCEMENT_OFF, and ENFORCEMENT_ON. The default value is DEFAULT.

返回:¶

A StdContactControl object.

返回类型:¶

StdContactControl

抛出:¶

RangeError –