Calibration of Material

The calibration commands are used for material calibration.

Create material calibrations

class CalibrationModel(
name,
description='',
stefanBoltzmann=None,
absoluteZero=None,
waveFormulation=NOT_SET,
modelType=STANDARD_EXPLICIT,
universalGas=None,
copyConstraints=1,
copyConnectors=1,
copyInteractions=1,
)[源代码]

基类:ModelBase

Abaqus creates a Model object named Model-1 when a session is started.

备注

This object can be accessed by:

mdb.models[name]

Public Data Attributes:

Inherited from ModelBase

name

A String specifying the repository key.

stefanBoltzmann

None or a Float specifying the Stefan-Boltzmann constant.

absoluteZero

None or a Float specifying the absolute zero constant.

waveFormulation

A SymbolicConstant specifying the type of incident wave formulation to be used in acoustic problems.

universalGas

None or a Float specifying the universal gas constant.

noPartsInputFile

A Boolean specifying whether an input file should be written without parts and assemblies.

endRestartStep

A Boolean specifying that the step specified by restartStep should be terminated at the increment specified by restartIncrement.

shellToSolid

A Boolean specifying that a shell global model drives a solid submodel.

lastChangedCount

A Float specifying the time stamp that indicates when the model was last changed.

description

A String specifying the purpose and contents of the Model object.

restartJob

A String specifying the name of the job that generated the restart data.

restartStep

A String specifying the name of the step where the restart analysis will start.

globalJob

A String specifying the name of the job that generated the results for the global model.

copyConstraints

A boolean specifying the status of constraints created in a model, in the model which instances this model.

copyConnectors

A boolean specifying the status of connectors created in a model, in the model which instances this model.

copyInteractions

A boolean specifying the status of interactions created in a model, in the model which instances this model.

keywordBlock

A KeywordBlock object.

amplitudes

A repository of Amplitude objects.

profiles

A repository of Profile objects.

boundaryConditions

A repository of BoundaryCondition objects.

constraints

A repository of ConstrainedSketchConstraint objects.

analyticalFields

A repository of AnalyticalField objects.

discreteFields

A repository of DiscreteField objects.

predefinedFields

A repository of PredefinedField objects.

interactions

A repository of Interaction objects.

interactionProperties

A repository of InteractionProperty objects.

contactControls

A repository of ContactControl objects.

contactInitializations

A repository of ContactInitialization objects.

contactStabilizations

A repository of ContactStabilization objects.

linkedInstances

A tuple of tuples of Strings specifying the linked child PartInstance name in the current model to the corresponding parent PartInstance name in a different model.

linkedParts

A tuple of tuples of Strings specifying the linked child Part name in the current model to the corresponding parent Part name in a different model.

loads

A repository of Load objects.

materials

A repository of Material objects.

calibrations

A repository of Calibration objects.

sections

A repository of Section objects.

remeshingRules

A repository of RemeshingRule objects.

sketches

A repository of ConstrainedSketch objects.

parts

A repository of Part objects.

steps

A repository of Step objects.

featureOptions

A FeatureOptions object.

adaptiveMeshConstraints

A repository of AdaptiveMeshConstraint objects.

adaptiveMeshControls

A repository of AdaptiveMeshControl objects.

timePoints

A repository of TimePoint objects.

filters

A repository of Filter objects.

integratedOutputSections

A repository of IntegratedOutputSection objects.

fieldOutputRequests

A repository of FieldOutputRequest objects.

historyOutputRequests

A repository of HistoryOutputRequest objects.

optimizationTasks

A repository of OptimizationTask objects.

tableCollections

A repository of TableCollection objects.

eventSeriesTypes

A repository of EventSeriesType objects.

eventSeriesDatas

A repository of EventSeriesData objects.

restartIncrement

An Int specifying the increment, interval, iteration or cycle where the restart analysis will start.

rootAssembly

An Assembly object.

Public Methods:

Calibration(name)

This method creates a Calibration object.

Inherited from ModelBase

__init__(name[, description, ...])

This method creates a Model object.

ModelFromInputFile(name, inputFileName)

This method creates a Model object by reading the keywords in an input file and creating the corresponding Abaqus/CAE objects.

ModelFromOdbFile(name, odbFileName)

This method creates a Model object by reading an output database and creating any corresponding Abaqus/CAE objects.

ModelFromNastranFile(modelName, inputFileName)

This method creates a Model object by reading the keywords in a Nastran bulk data file or Nastran input file and creating any corresponding Abaqus/CAE objects.

setValues([description, noPartsInputFile, ...])

This method modifies the Model object.


Member Details:

Calibration(name)[源代码]

This method creates a Calibration object.

备注

This function can be accessed by:

mdb.models[name].Calibration
参数:
name

A String specifying the name of the new calibration.

返回:

A Calibration object.

返回类型:

Calibration

Other Classes

class Behavior(name, typeName)[源代码]

基类:object

The Behavior object specifies the method used for calibrating a material.

备注

This object can be accessed by:

import calibration
mdb.models[name].calibrations[name].behaviors[name]

Member Details:

biAxialAllName : --is-rst--:py:class:`str` = ''[源代码]

A String specifying the name of the dataset containing all the raw data in the test data file. Only valid if the behavior is of type FeFpBehavior

calibrationName : --is-rst--:py:class:`str` = ''[源代码]

A string specifying the name of calibration to which the behavior belongs.

compute_E(dataSet)[源代码]

This method computes the value of young’s modulus from the existing DataSet object. The method is only valid for ElasIsoBehavior type of behavior.

参数:
dataSet

A DataSet object.

返回:

A tuple consisting of a and b values of the regression line(y = ax + b), coefficient of determination(r-squared) value and the start and end-points of the line.

返回类型:

Sequence[float]

compute_elasticModulus(yieldPoint)[源代码]

This method computes the value of the elastic modulus from the yieldpoint value. The method is only valid for ElasPlasIsoBehavior type of behavior.

参数:
yieldPoint

A tuple consisting of coordinates of the yieldpoint.

返回:

A float specifying the value of elastic modulus.

返回类型:

float

compute_nu(dataSet)[源代码]

This method computes the value of Poisson’s Ratio from the existing DataSet object. The method is only valid for ElasIsoBehavior and ElasPlasIsoBehavior type of behavior.

参数:
dataSet

A DataSet object.

返回:

A tuple consisting of a and b values of the regression line(y = ax + b), coefficient of determination(r-squared) value and the start and end-points of the line.

返回类型:

Sequence[float]

compute_plasticPoints(dataSet, slider_val, start_index, end_index, yp='')[源代码]

This method extracts the coordinates of the Plastic Points. The method is only valid for ElasPlasIsoBehavior type of behavior.

参数:
dataSet

A DataSet object.

slider_val

A float specifying the number of values to be taken.

start_index

A float specifying the lower limit of the range.

end_index

A float specifying the upper limit of the range.

yp=''

Coordinates of the yieldpoint. The default value is (0,0).

返回:

A sequence of coordinates of the Plastic points..

返回类型:

Sequence[tuple[float]]

compute_ultimatePoint(dataSet)[源代码]

This method computes the coordinates of the Ultimate point from the existing DataSet object. The method is only valid for ElasPlasIsoBehavior type of behavior.

参数:
dataSet

A DataSet object.

返回:

Coordinates of the ultimate point.

返回类型:

Sequence[float]

mapToMaterial(materialName)[源代码]

This method appends the calibration data obtained from the DataSet object to an existing material object. In the case of ElasIsoBehavior, it appends the young’s modulus and poisson’s ratio. For ElasPlasIsoBehavior it appends the young’s modulus, poisson’s ratio and Plastic points range and for FeFpBehavior it appends Plastic points range and Mullins effect properties.

参数:
materialName

A String specifying the name of the existing material

modelName : --is-rst--:py:class:`str` = ''[源代码]

A string specifying the name of the model to which the behavior belongs.

name : --is-rst--:py:class:`str`[源代码]

A String specifying the name of the new behavior.

setValues(
E='',
nu='',
ds1Name='',
ds2Name='',
materialName='',
yieldPoint='',
ultimatePoint='',
plasticPoints='',
PoissonsRatio='',
elasticModulus='',
plasticPointsRange='',
name='',
uniaxialName='',
biaxialName='',
interpolation='',
uniWeight='',
biWeight='',
uMullinsReload='',
uMullinsUnload='',
uPYieldPoint=(0.0, 0.0, 0.0),
uPermSet='',
uPrimary='',
bMullinsReload='',
bMullinsUnload='',
bPYieldPoint=(0.0, 0.0, 0.0),
bPermSet='',
bPrimary='',
)[源代码]

This method modifies the data for an existing behavior object.

参数:
E=''

Young’s modulus. Only valid if the behavior type is ElasIsoBehavior.

nu=''

Poisson’s ratio. Only valid if the behavior type is ElasIsoBehavior.

ds1Name=''

The name of the first data set. Only valid if the behavior type is ElasIsoBehavior or ElasPlasIsoBehavior

ds2Name=''

The name of the second data set. Only valid if the behavior type is ElasIsoBehavior or ElasPlasIsoBehavior

materialName=''

Material Name.

yieldPoint=''

Stress/strain value for the material yield point.Only valid if the behavior type is ElasPlasIsoBehavior

ultimatePoint=''

Stress/strain value for the material ultimate point.Only valid if the behavior type is ElasPlasIsoBehavior

plasticPoints=''

Stress/strain values for the Plastic portion of material curve. Only valid if the behavior type is ElasPlasIsoBehavior

PoissonsRatio=''

Poisson’s Ratio. Only valid if the behavior type is ElasPlasIsoBehavior

elasticModulus=''

Young’s Modulus for the elastic portion of the material curve. Only valid if the behavior type is ElasPlasIsoBehavior

plasticPointsRange=''

Extent of the material Plastic points. Only valid if the behavior type is ElasPlasIsoBehavior

name=''

Name of the behavior.

uniaxialName=''

Name of the uniaxial dataset. Only valid if the behavior type is FeFpBehavior

biaxialName=''

Name of the biaxial dataset. Only valid if the behavior type is FeFpBehavior

interpolation=''

‘linear’ specifies linear interpolation between data points, otherwise ‘logarithmic’. Only valid if the behavior type is FeFpBehavior

uniWeight=''

Uniaxial weight factor, uniWeight + biWeight should equal 1.0. Only valid if the behavior type is FeFpBehavior

biWeight=''

Biaxial weight factor, uniWeight + biWeight should equal 1.0. Only valid if the behavior type is FeFpBehavior

uMullinsReload=''

A List of strings, specifying names of reloading DataSet objects obtained from uniaxial test data. Only valid if the behavior is of type FeFpBehavior

uMullinsUnload=''

A List of strings, specifying names of reloading DataSet objects obtained from uniaxial test data. Only valid if the behavior is of type FeFpBehavior

uPYieldPoint=(0.0, 0.0, 0.0)

A tuple specifying the coordinates of yield point of the permanent data set. Only valid if the behavior is of type FeFpBehavior

uPermSet=''

A List of strings, specifying names of permanent DataSet objects obtained from uniaxial test data. Only valid if the behavior is of type FeFpBehavior

uPrimary=''

A string specifying name of Primary DataSet object.Only valid if the behavior is of type FeFpBehavior

bMullinsReload=''

A List of strings, specifying names of reloading DataSet objects obtained from biaxial test data. Only valid if the behavior is of type FeFpBehavior

bMullinsUnload=''

A List of strings, specifying names of unloading DataSet objects obtained from biaxial test data. Only valid if the behavior is of type FeFpBehavior

bPYieldPoint=(0.0, 0.0, 0.0)

A tuple specifying the coordinates of yield point of the permanent data set. Only valid if the behavior is of type FeFpBehavior

bPermSet=''

A List of strings, specifying names of permanent DataSet objects obtained from biaxial test data. Only valid if the behavior is of type FeFpBehavior

bPrimary=''

A string specifying name of Primary DataSet object. Only valid if the behavior is of type FeFpBehavior

typeName : --is-rst--:py:class:`str`[源代码]

A String specifying the type of the new Behavior. Values can be “ElasIsoBehavior”, “ElasPlasIsoBehavior”, “FeFpBehavior”, or a user plug-in behavior type.

uniAxialAllName : --is-rst--:py:class:`str` = ''[源代码]

A String specifying the name of the dataset containing all the raw data in the test data file. Only valid if the behavior is of type FeFpBehavior

xyDataDissect(dsName, modelName, calibrationName, biaxial=True)[源代码]

This method extracts primary, unload, reload and permanent DataSet objects from the existing DataSet object.The method is only valid for FeFpBehavior type of behavior.

参数:
dsName

A string specifying the name of the uniaxial/biaxial test dataset.

modelName

A string specifying the name of the model to which the calibration behavior belongs.

calibrationName

A string specifying the name of the Calibration object to which the behavior belongs.

biaxial=True

A boolean specifying whether the test data is biaxial or uniaxial. The default value is True.

返回:

A sequence of strings specifying names of the DataSet objects containing loading, unloading, reloading and primary datasets.

返回类型:

Sequence[str]

class DataSet(name, data=(), type='', form='')[源代码]

基类:object

The DataSetobject specifies material test data.

备注

This object can be accessed by:

import calibration
mdb.models[name].calibrations[name].dataSets[name]

Member Details:

data : --is-rst--:py:class:`tuple` = ()[源代码]

A sequence of pairs of Floats specifying data set type pairs. Possible values are for stress/strain, force/displacement, or transverse strain/axial strain pairs.

form : --is-rst--:py:class:`str` = ''[源代码]

A String specifying the form of the new dataset. Values can be “NOMINAL” or “TRUE”. The default value is “NOMINAl”.

name : --is-rst--:py:class:`str`[源代码]

A String specifying the name of the new dataset.

setValues(data=())[源代码]

This method modifies the data for an existing DataSet object.

参数:
data=()

A sequence of pairs of Floats specifying data set type pairs.

type : --is-rst--:py:class:`str` = ''[源代码]

A String specifying the type of the new dataset. Values can be “STRESS/STRAIN”, “FORCE/DISPLACEMENT”, or “AXIALSTRAIN/TRANSVERSESTRAIN”. The default value is “STRESS/STRAIN”.

class Calibration(name)[源代码]

基类:object

A Calibration object is the object used to specify a material calibration. The Calibration object stores the data that is used for specifying materials from test data.

备注

This object can be accessed by:

import calibration
mdb.models[name].calibrations[name]

Member Details:

Behavior(name, typeName)[源代码]

This method creates a Behavior object.

备注

This function can be accessed by:

mdb.models[name].Calibration
参数:
name

A String specifying the name of the new behavior.

typeName

A String specifying the type of the new Behavior. Values can be “ElasIsoBehavior”, “ElasPlasIsoBehavior”, “FeFpBehavior”, or a user plug-in behavior type.

返回:

A Behavior object.

返回类型:

Behavior

DataSet(name, data=(), type='', form='')[源代码]

This method creates a DataSet object.

备注

This function can be accessed by:

mdb.models[name].Calibration
参数:
name

A String specifying the name of the new dataset.

data=()

A sequence of pairs of Floats specifying data set type pairs. Possible values are for stress/strain, force/displacement, or transverse strain/axial strain pairs.

type=''

A String specifying the type of the new dataset. Values can be “STRESS/STRAIN”, “FORCE/DISPLACEMENT”, or “AXIALSTRAIN/TRANSVERSESTRAIN”. The default value is “STRESS/STRAIN”.

form=''

A String specifying the form of the new dataset. Values can be “NOMINAL” or “TRUE”. The default value is “NOMINAl”.

返回:

A DataSet object.

返回类型:

DataSet

behaviors : --is-rst--:py:class:`~abaqus.Calibration.Behavior.Behavior` | :py:obj:`None` = None[源代码]

A Behavior object.

dataSets : --is-rst--:py:class:`~abaqus.Calibration.DataSet.DataSet` | :py:obj:`None` = None[源代码]

A DataSet object.

name : --is-rst--:py:class:`str`[源代码]

A String specifying the name of the new calibration.