Load¶

A specific type of load object and a specific type of load state object are designed for each type of load. A load object stores the nonpropagating data of a load as well as a number of instances of the corresponding load state object, each of which stores the propagating data of the load in a single step. Instances of the load state object are created and deleted internally by its corresponding load object.

Load Case commands are used for configuring load cases in specific types of steps that may use them.

Load¶

The Load object is the abstract base type for other Load objects. The Load object has no explicit constructor. The methods and members of the Load object are common to all objects derived from Load.

Create loads¶

class LoadModel( name, description='', stefanBoltzmann=None, absoluteZero=None, waveFormulation=NOT_SET, modelType=STANDARD_EXPLICIT, universalGas=None, copyConstraints=1, copyConnectors=1, copyInteractions=1, )[源代码]¶

基类：ModelBase

Abaqus creates a Model object named Model-1 when a session is started.

备注

This object can be accessed by:

mdb.models[name]

备注

Check LoadModel on help.3ds.com/2023.

Public Data Attributes:

Inherited from ModelBase

`name`	A String specifying the repository key.
`stefanBoltzmann`	None or a Float specifying the Stefan-Boltzmann constant.
`absoluteZero`	None or a Float specifying the absolute zero constant.
`waveFormulation`	A SymbolicConstant specifying the type of incident wave formulation to be used in acoustic problems.
`universalGas`	None or a Float specifying the universal gas constant.
`noPartsInputFile`	A Boolean specifying whether an input file should be written without parts and assemblies.
`endRestartStep`	A Boolean specifying that the step specified by restartStep should be terminated at the increment specified by restartIncrement.
`shellToSolid`	A Boolean specifying that a shell global model drives a solid submodel.
`lastChangedCount`	A Float specifying the time stamp that indicates when the model was last changed.
`description`	A String specifying the purpose and contents of the Model object.
`restartJob`	A String specifying the name of the job that generated the restart data.
`restartStep`	A String specifying the name of the step where the restart analysis will start.
`globalJob`	A String specifying the name of the job that generated the results for the global model.
`copyConstraints`	A boolean specifying the status of constraints created in a model, in the model which instances this model.
`copyConnectors`	A boolean specifying the status of connectors created in a model, in the model which instances this model.
`copyInteractions`	A boolean specifying the status of interactions created in a model, in the model which instances this model.
`keywordBlock`	A KeywordBlock object.
`amplitudes`	A repository of Amplitude objects.
`profiles`	A repository of Profile objects.
`boundaryConditions`	A repository of BoundaryCondition objects.
`constraints`	A repository of ConstrainedSketchConstraint objects.
`analyticalFields`	A repository of AnalyticalField objects.
`discreteFields`	A repository of DiscreteField objects.
`predefinedFields`	A repository of PredefinedField objects.
`interactions`	A repository of Interaction objects.
`interactionProperties`	A repository of InteractionProperty objects.
`contactControls`	A repository of ContactControl objects.
`contactInitializations`	A repository of ContactInitialization objects.
`contactStabilizations`	A repository of ContactStabilization objects.
`linkedInstances`	A tuple of tuples of Strings specifying the linked child PartInstance name in the current model to the corresponding parent PartInstance name in a different model.
`linkedParts`	A tuple of tuples of Strings specifying the linked child Part name in the current model to the corresponding parent Part name in a different model.
`loads`	A repository of Load objects.
`materials`	A repository of Material objects.
`calibrations`	A repository of Calibration objects.
`sections`	A repository of Section objects.
`remeshingRules`	A repository of RemeshingRule objects.
`sketches`	A repository of ConstrainedSketch objects.
`parts`	A repository of Part objects.
`steps`	A repository of Step objects.
`featureOptions`	A FeatureOptions object.
`adaptiveMeshConstraints`	A repository of AdaptiveMeshConstraint objects.
`adaptiveMeshControls`	A repository of AdaptiveMeshControl objects.
`timePoints`	A repository of TimePoint objects.
`filters`	A repository of Filter objects.
`integratedOutputSections`	A repository of IntegratedOutputSection objects.
`fieldOutputRequests`	A repository of FieldOutputRequest objects.
`historyOutputRequests`	A repository of HistoryOutputRequest objects.
`optimizationTasks`	A repository of OptimizationTask objects.
`tableCollections`	A repository of TableCollection objects.
`eventSeriesTypes`	A repository of EventSeriesType objects.
`eventSeriesDatas`	A repository of EventSeriesData objects.
`restartIncrement`	An Int specifying the increment, interval, iteration or cycle where the restart analysis will start.
`rootAssembly`	An Assembly object.

Public Methods:

`BodyCharge`(name, createStepName, region, ...)	This method creates a BodyCharge object.
`BodyConcentrationFlux`(name, createStepName, ...)	This method creates a BodyConcentrationFlux object.
`BodyCurrent`(name, createStepName, region, ...)	This method creates a BodyCurrent object.
`BodyCurrentDensity`(name, createStepName, ...)	This method creates a BodyCurrentDensity object.
`BodyForce`(name, createStepName, region[, ...])	This method creates a BodyForce object.
`BodyHeatFlux`(name, createStepName, region, ...)	This method creates a BodyHeatFlux object.
`BoltLoad`(name, createStepName, region, ...)	This method creates a BoltLoad object.
`ConcCharge`(name, createStepName, region, ...)	This method creates a ConcCharge object.
`ConcConcFlux`(name, createStepName, region, ...)	This method creates a ConcConcFlux object.
`ConcCurrent`(name, createStepName, region, ...)	This method creates a ConcCurrent object.
`ConcentratedForce`(name, createStepName, region)	This method creates a ConcentratedForce object.
`ConcentratedHeatFlux`(name, createStepName, ...)	This method creates a ConcentratedHeatFlux object.
`ConcPoreFluid`(name, createStepName, region, ...)	This method creates a ConcPoreFluid object.
`ConnectorForce`(name, createStepName[, ...])	This method creates a ConnectorForce object on a wire region.
`ConnectorMoment`(name, createStepName[, ...])	This method creates a ConnectorMoment object on a wire region.
`CoriolisForce`(name, createStepName, region, ...)	This method creates a CoriolisForce object.
`Gravity`(name, createStepName[, ...])	This method creates a Gravity object.
`InertiaRelief`(name, createStepName[, u1, ...])	This method creates an InertiaRelief object.
`InwardVolAccel`(name, createStepName, region, ...)	This method creates a InwardVolAccel object.
`LineLoad`(name, createStepName, region[, ...])	This method creates a LineLoad object.
`Moment`(name, createStepName, region[, cm1, ...])	This method creates a Moment object.
`PEGLoad`(name, createStepName, region[, ...])	This method creates a PEGLoad object.
`PipePressure`(name, createStepName, region, ...)	This method creates a Pressure object.
`Pressure`(name, createStepName, region[, ...])	This method creates a Pressure object.
`RotationalBodyForce`(name, createStepName, ...)	This method creates a RotationalBodyForce object.
`ShellEdgeLoad`(name, createStepName, region, ...)	This method creates a ShellEdgeLoad object.
`SubmodelSB`(name, createStepName, region, ...)	This method creates a SubmodelSB object.
`SubstructureLoad`(name, createStepName, ...)	This method creates a SubstructureLoad object.
`SurfaceCharge`(name, createStepName, region, ...)	This method creates a SurfaceCharge object.
`SurfaceConcentrationFlux`(name, ...[, field, ...])	This method creates a SurfaceConcentrationFlux object.
`SurfaceCurrent`(name, createStepName, region, ...)	This method creates a SurfaceCurrent object.
`SurfaceCurrentDensity`(name, createStepName, ...)	This method creates a SurfaceCurrentDensity object.
`SurfaceHeatFlux`(name, createStepName, ...[, ...])	This method creates a SurfaceHeatFlux object.
`SurfacePoreFluid`(name, createStepName, ...)	This method creates a SurfacePoreFluid object.
`SurfaceTraction`(name, createStepName, ...[, ...])	This method creates a SurfaceTraction object.

Inherited from ModelBase

`__init__`(name[, description, ...])	This method creates a Model object.
`ModelFromInputFile`(name, inputFileName)	This method creates a Model object by reading the keywords in an input file and creating the corresponding Abaqus/CAE objects.
`ModelFromOdbFile`(name, odbFileName)	This method creates a Model object by reading an output database and creating any corresponding Abaqus/CAE objects.
`ModelFromNastranFile`(modelName, inputFileName)	This method creates a Model object by reading the keywords in a Nastran bulk data file or Nastran input file and creating any corresponding Abaqus/CAE objects.
`setValues`([description, noPartsInputFile, ...])	This method modifies the Model object.

Member Details:

BodyCharge( name, createStepName, region, magnitude, amplitude=UNSET, distributionType=UNIFORM, field='', )[源代码]¶

This method creates a BodyCharge object.

备注

This function can be accessed by:

mdb.models[name].BodyCharge

备注

Check BodyCharge on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

返回:¶

A BodyCharge object.

返回类型:¶

BodyCharge

BodyConcentrationFlux( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

This method creates a BodyConcentrationFlux object.

备注

This function can be accessed by:

mdb.models[name].BodyConcentrationFlux

备注

Check BodyConcentrationFlux on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the body concentration flux magnitude. magnitude is optional if distributionType = USER_DEFINED.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the body concentration flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A BodyConcentrationFlux object.

返回类型:¶

BodyConcentrationFlux

BodyCurrent( name, createStepName, region, magnitude, amplitude=UNSET, distributionType=UNIFORM, field='', )[源代码]¶

This method creates a BodyCurrent object.

备注

This function can be accessed by:

mdb.models[name].BodyCurrent

备注

Check BodyCurrent on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

返回:¶

A BodyCurrent object.

返回类型:¶

BodyCurrent

BodyCurrentDensity( name, createStepName, region, comp1, comp2, comp3, amplitude=UNSET, distributionType=UNIFORM, )[源代码]¶

This method creates a BodyCurrentDensity object.

备注

This function can be accessed by:

mdb.models[name].BodyCurrentDensity

备注

Check BodyCurrentDensity on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
comp1¶: A Complex specifying the first component of the load.
comp2¶: A Complex specifying the second component of the load.
comp3¶: A Complex specifying the third component of the load.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and USER_DEFINED. The default value is UNIFORM.

返回:¶

A BodyCurrentDensity object.

返回类型:¶

BodyCurrentDensity

BodyForce( name, createStepName, region, field='', distributionType=UNIFORM, comp1=None, comp2=None, comp3=None, amplitude=UNSET, )[源代码]¶

This method creates a BodyForce object.

备注

This function can be accessed by:

mdb.models[name].BodyForce

备注

Check BodyForce on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
comp1=None¶: A Float or a Complex specifying the body force component in the 1-direction. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero unless distributionType = USER_DEFINED.
comp2=None¶: A Float or a Complex specifying the body force component in the 2-direction.
comp3=None¶: A Float or a Complex specifying the body force component in the 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A BodyForce object.

返回类型:¶

BodyForce

BodyHeatFlux( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

This method creates a BodyHeatFlux object.

备注

This function can be accessed by:

mdb.models[name].BodyHeatFlux

备注

Check BodyHeatFlux on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the body heat flux magnitude. magnitude is optional if distributionType = USER_DEFINED.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the body heat flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A BodyHeatFlux object.

返回类型:¶

BodyHeatFlux

BoltLoad( name, createStepName, region, magnitude, datumAxis, boltMethod=APPLY_FORCE, amplitude=UNSET, preTenSecPartLevel=False, )[源代码]¶

This method creates a BoltLoad object.

备注

This function can be accessed by:

mdb.models[name].BoltLoad

备注

Check BoltLoad on help.3ds.com/2023.

参数:¶

name¶

A String specifying the load repository key.

createStepName¶

A String specifying the name of the step in which the load is created. This must be the first analysis step name.

region¶

A Region object specifying the region to which the load is applied.

magnitude¶

A Float specifying the bolt load magnitude.

datumAxis¶

A DatumAxis object specifying the orientation of the pre-tension section normal. Note: datumAxis is applicable only for Solid and Shell regions; it has no meaning for Wire regions.

boltMethod=APPLY_FORCE¶

A SymbolicConstant specifying the method of applying the bolt load. Possible values are APPLY_FORCE and ADJUST_LENGTH. The default value is APPLY_FORCE.

amplitude=UNSET¶

A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

preTenSecPartLevel=False¶

A Boolean specifying whether the pre-tension section is to be defined at the part level. The default value is False. You should provide the preTenSecPartLevel argument only if the selected region belongs to a dependent part instance. A pre-tension section cannot be defined at the part level for independent and model instances.

Added in version 2018: The preTenSecPartLevel argument was added.

返回:¶

A BoltLoad object.

返回类型:¶

BoltLoad

抛出:¶

TextError –

ConcCharge( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

This method creates a ConcCharge object.

备注

This function can be accessed by:

mdb.models[name].ConcCharge

备注

Check ConcCharge on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A ConcCharge object.

返回类型:¶

ConcCharge

ConcConcFlux( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

This method creates a ConcConcFlux object.

备注

This function can be accessed by:

mdb.models[name].ConcConcFlux

备注

Check ConcConcFlux on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A ConcConcFlux object.

返回类型:¶

ConcConcFlux

ConcCurrent( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

This method creates a ConcCurrent object.

备注

This function can be accessed by:

mdb.models[name].ConcCurrent

备注

Check ConcCurrent on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A ConcCurrent object.

返回类型:¶

ConcCurrent

ConcPoreFluid( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

This method creates a ConcPoreFluid object.

备注

This function can be accessed by:

mdb.models[name].ConcPoreFluid

备注

Check ConcPoreFluid on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A ConcPoreFluid object.

返回类型:¶

ConcPoreFluid

ConcentratedForce( name, createStepName, region, distributionType=UNIFORM, field='', cf1=None, cf2=None, cf3=None, amplitude=UNSET, follower=0, localCsys=None, )[源代码]¶

This method creates a ConcentratedForce object.

备注

This function can be accessed by:

mdb.models[name].ConcentratedForce

备注

Check ConcentratedForce on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
cf1=None¶: A Float or a Complex specifying the concentrated force component in the 1-direction. Although cf1, cf2, and cf3 are optional arguments, at least one of them must be nonzero.
cf2=None¶: A Float or a Complex specifying the concentrated force component in the 2-direction.
cf3=None¶: A Float or a Complex specifying the concentrated force component in the 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
follower=0¶: A Boolean specifying whether the direction of the force rotates with the rotation at each node of the region. You should provide the follower argument only if it is valid for the specified step. The default value is OFF.
localCsys=None¶: None or a DatumCsys object specifying the local coordinate system of the load’s degrees of freedom. If localCsys = None, the degrees of freedom are defined in the global coordinate system. When this member is queried, it returns an Int. The default value is None.

返回:¶

A ConcentratedForce object.

返回类型:¶

ConcentratedForce

ConcentratedHeatFlux( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, dof=11, )[源代码]¶

This method creates a ConcentratedHeatFlux object.

备注

This function can be accessed by:

mdb.models[name].ConcentratedHeatFlux

备注

Check ConcentratedHeatFlux on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
dof=11¶: An Int specifying the degree of freedom of the node, to which the concentrated heat flux should be applied. The default value is 11.

返回:¶

A ConcentratedHeatFlux object.

返回类型:¶

ConcentratedHeatFlux

ConnectorForce( name, createStepName, region='', fastenerName='', fastenerSetName='', f1=None, f2=None, f3=None, amplitude=UNSET, )[源代码]¶

This method creates a ConnectorForce object on a wire region. Alternatively, the load may also be applied to a wire set referenced from an assembled fastener template model.

备注

This function can be accessed by:

mdb.models[name].ConnectorForce

备注

Check ConnectorForce on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region=''¶: The wire region to which the load is applied. This argument is not valid when fastenerName and fastenerSetName are specified.
fastenerName=''¶: A String specifying the name of the assembled fastener to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerSetName must also be specified. The default value is an empty string.
fastenerSetName=''¶: A String specifying the assembled fastener template model set to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerName must also be specified. The default value is an empty string.
f1=None¶: A Float or a Complex specifying the connector force component in the connector’s local 1-direction. Note: Although f1, f2, and f3 are optional arguments, at least one of them must be nonzero.
f2=None¶: A Float or a Complex specifying the connector force component in the connector’s local 2-direction.
f3=None¶: A Float or a Complex specifying the connector force component in the connector’s local 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A ConnectorForce object.

返回类型:¶

ConnectorForce

ConnectorMoment( name, createStepName, region='', fastenerName='', fastenerSetName='', m1=None, m2=None, m3=None, amplitude=UNSET, )[源代码]¶

This method creates a ConnectorMoment object on a wire region. Alternatively, the load may also be applied to a wire set referenced from an assembled fastener template model.

备注

This function can be accessed by:

mdb.models[name].ConnectorMoment

备注

Check ConnectorMoment on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region=''¶: The wire region to which the load is applied. This argument is not valid when fastenerName and fastenerSetName are specified.
fastenerName=''¶: A String specifying the name of the assembled fastener to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerSetName must also be specified. The default value is an empty string.
fastenerSetName=''¶: A String specifying the assembled fastener template model set to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerName must also be specified. The default value is an empty string.
m1=None¶: A Float or a Complex specifying the moment component in the connector’s local 4-direction.
m2=None¶: A Float or a Complex specifying the moment component in the connector’s local 5-direction.
m3=None¶: A Float or a Complex specifying the moment component in the connector’s local 6-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A ConnectorMoment object.

返回类型:¶

ConnectorMoment

CoriolisForce( name, createStepName, region, magnitude, point1, point2, amplitude=UNSET, distributionType=UNIFORM, field='', )[源代码]¶

This method creates a CoriolisForce object.

备注

This function can be accessed by:

mdb.models[name].CoriolisForce

备注

Check CoriolisForce on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
point1¶: A sequence of Floats specifying the first point on the axis of rotation for the load.
point2¶: A sequence of Floats specifying the second point on the axis of rotation for the load.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

返回:¶

A CoriolisForce object.

返回类型:¶

CoriolisForce

Gravity( name, createStepName, distributionType=UNIFORM, field='', region=None, comp1=None, comp2=None, comp3=None, amplitude=UNSET, )[源代码]¶

This method creates a Gravity object.

备注

This function can be accessed by:

mdb.models[name].Gravity

备注

Check Gravity on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
region=None¶: A Region object specifying the region to which the load is applied.
comp1=None¶: A Float or a Complex specifying the component of the load in the 1-direction. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero.
comp2=None¶: A Float or a Complex specifying the component of the load in the 2-direction.
comp3=None¶: A Float or a Complex specifying the component of the load in the 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A Gravity object.

返回类型:¶

Gravity

InertiaRelief( name, createStepName, u1=0, u2=0, u3=0, ur1=0, ur2=0, ur3=0, referencePoint=(), localCoordinates=None, )[源代码]¶

This method creates an InertiaRelief object.

备注

This function can be accessed by:

mdb.models[name].InertiaRelief

备注

Check InertiaRelief on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
u1=0¶: A Boolean specifying the 1-direction as a free direction. Note: Although u1, u2, u3, ur1, ur2, and ur3 are optional arguments, at least one of them must be specified. Further, any specified set of free directions cannot include only two rotational degrees of freedom.
u2=0¶: A Boolean specifying the 2-direction as a free direction.
u3=0¶: A Boolean specifying the 3-direction as a free direction.
ur1=0¶: A Boolean specifying the rotation about the 1-direction as a free direction.
ur2=0¶: A Boolean specifying the rotation about the 2-direction as a free direction.
ur3=0¶: A Boolean specifying the rotation about the 3-direction as a free direction.
referencePoint=()¶: A sequence of Floats specifying the X, Y and Z coordinates of a fixed rotation point or a point on the rotation axis or a point on the symmetry line, about which rotations are defined. Such a point must be specified only for certain combinations of free directions.
localCoordinates=None¶: None or a DatumCsys object specifying the local coordinate system of the rigid body degrees of freedom for the inertia relief load. If localCoordinates = None, the free directions are defined in the global coordinate system. When this member is queried, it returns an Int. The default value is None.

返回:¶

An InertiaRelief object.

返回类型:¶

InertiaRelief

InwardVolAccel( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

This method creates a InwardVolAccel object.

备注

This function can be accessed by:

mdb.models[name].InwardVolAccel

备注

Check InwardVolAccel on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the name of the first analysis step.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

An InwardVolAccel object.

返回类型:¶

InwardVolAccel

LineLoad( name, createStepName, region, distributionType=UNIFORM, field='', comp1=None, comp2=None, comp3=None, amplitude=UNSET, system=GLOBAL, )[源代码]¶

This method creates a LineLoad object.

备注

This function can be accessed by:

mdb.models[name].LineLoad

备注

Check LineLoad on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
comp1=None¶: A Float or a Complex specifying the component of the load in the global or the beam local 1-direction. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero unless distributionType = USER_DEFINED.
comp2=None¶: A Float or a Complex specifying the component of the load in the global or the beam local 2-direction.
comp3=None¶: A Float or a Complex specifying the component of the load in the global 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
system=GLOBAL¶: A SymbolicConstant specifying whether the load is applied in a global or the beam local frame of reference. Possible values are GLOBAL and LOCAL. The default value is GLOBAL.

返回:¶

A LineLoad object.

返回类型:¶

LineLoad

Moment( name, createStepName, region, cm1=None, cm2=None, cm3=None, amplitude=UNSET, follower=0, localCsys=None, distributionType=UNIFORM, field='', )[源代码]¶

This method creates a Moment object.

备注

This function can be accessed by:

mdb.models[name].Moment

备注

Check Moment on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
cm1=None¶: A Float or a Complex specifying the load component in the 4-direction. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero.
cm2=None¶: A Float or a Complex specifying the load component in the 5- direction.
cm3=None¶: A Float or a Complex specifying the load component in the 6-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
follower=0¶: A Boolean specifying whether the direction of the force rotates with the rotation of the node. You should provide the follower argument only if it is valid for the specified step. The default value is OFF.
localCsys=None¶: None or a DatumCsys object specifying the ID of the Datum coordinate system used as the local coordinate system of the load. If localCsys = None, the load is defined in the global coordinate system. When this member is queried, it returns an Int. The default value is None.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

返回:¶

A Moment object.

返回类型:¶

Moment

PEGLoad( name, createStepName, region, distributionType=UNIFORM, field='', comp1=None, comp2=None, comp3=None, amplitude=UNSET, )[源代码]¶

This method creates a PEGLoad object.

备注

This function can be accessed by:

mdb.models[name].PEGLoad

备注

Check PEGLoad on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
comp1=None¶: A Float or a Complex specifying the load component at dof 1 of reference node 1. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero.
comp2=None¶: A Float or a Complex specifying the load component at dof 1 of reference node 2.
comp3=None¶: A Float or a Complex specifying the load component at dof 2 of reference node 2.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A PEGLoad object.

返回类型:¶

PEGLoad

PipePressure( name, createStepName, region, magnitude, diameter, hZero, hReference, field='', amplitude=UNSET, distributionType=UNIFORM, side=INTERNAL, )[源代码]¶

This method creates a Pressure object.

备注

This function can be accessed by:

mdb.models[name].PipePressure

备注

Check PipePressure on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the pressure is created.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the pressure magnitude. Note: magnitude is optional if distributionType = USER_DEFINED.
diameter¶: A Float specifying the effective inner or outer diameter.
hZero¶: A Float specifying the height of the zero pressure level when distributionType = HYDROSTATIC.
hReference¶: A Float specifying the height of the reference pressure level when distributionType = HYDROSTATIC.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying whether the load is uniform. Possible values are UNIFORM, HYDROSTATIC, USER_DEFINED, and FIELD. The default value is UNIFORM.
side=INTERNAL¶: A SymbolicConstant specifying whether the pressure is applied internally or externally. Possible values are INTERNAL and EXTERNAL. The default value is INTERNAL.

返回:¶

A PipePressure object.

返回类型:¶

PipePressure

Pressure( name, createStepName, region, magnitude=0.0, hZero=0.0, hReference=0.0, field='', refPoint='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

This method creates a Pressure object.

备注

This function can be accessed by:

mdb.models[name].Pressure

备注

Check Pressure on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the pressure is created.
region¶: A Region object specifying the region to which the load is applied.
magnitude=0.0¶: A Float or a Complex specifying the pressure magnitude. Note: magnitude is optional if distributionType = USER_DEFINED.
hZero=0.0¶: A Float specifying the height of the zero pressure level when distributionType = HYDROSTATIC.
hReference=0.0¶: A Float specifying the height of the reference pressure level when distributionType = HYDROSTATIC.
field=''¶: A String specifying the name of the AnalyticalField or DiscreteField object associated with this load. The field argument applies only when distributionType = FIELD or distributionType = DISCRETE_FIELD. The default value is an empty string.
refPoint=''¶: A Region specifying the reference point from which the relative velocity is determined when distributionType = STAGNATION or VISCOUS.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the pressure is distributed spatially. Possible values are UNIFORM, USER_DEFINED, FIELD, HYDROSTATIC, STAGNATION, VISCOUS, TOTAL_FORCE, and DISCRETE_FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A Pressure object.

返回类型:¶

Pressure

RotationalBodyForce( name, createStepName, region, magnitude, point1, point2, distributionType=UNIFORM, field='', centrifugal=0, rotaryAcceleration=0, amplitude=UNSET, )[源代码]¶

This method creates a RotationalBodyForce object.

备注

This function can be accessed by:

mdb.models[name].RotationalBodyForce

备注

Check RotationalBodyForce on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
point1¶: A sequence of Floats specifying the first point on the axis of rotation for the load.
point2¶: A sequence of Floats specifying the second point on the axis of rotation for the load.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
centrifugal=0¶: A Boolean specifying whether or not the effect of the load is centrifugal. The default value is OFF. Note: At least one of centrifugal or rotaryAcceleration must be specified and only one must have the value ON.
rotaryAcceleration=0¶: A Boolean specifying whether or not the effect of the load is rotary acceleration. The default value is OFF. Note: At least one of centrifugal or rotaryAcceleration must be specified and only one must have the value ON.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A RotationalBodyForce object.

返回类型:¶

RotationalBodyForce

ShellEdgeLoad( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, angle=0, axis=AXIS_1, localCsys=GENERAL, userCsys=GENERAL, directionVector=(), follower=1, resultant=0, traction=NORMAL, )[源代码]¶

This method creates a ShellEdgeLoad object.

备注

This function can be accessed by:

mdb.models[name].ShellEdgeLoad

备注

Check ShellEdgeLoad on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float or Complex specifying the load magnitude. magnitude is optional if distributionType = USER_DEFINED
distributionType=UNIFORM¶: A SymbolicConstant specifying how the shell edge load is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
angle=0¶: A Float specifying an additional rotation of directionVector about an axis. The default value is 0.This parameter is available only if traction is GENERAL.
axis=AXIS_1¶: A SymbolicConstant specifying the axis about which to apply an additional rotation of directionVector. Possible values are AXIS_1, AXIS_2, AXIS_3. The default value is AXIS_1.This parameter is available only if traction is GENERAL.
localCsys=GENERAL¶: A DatumCsys object specifying the local coordinate system of the load’s degrees of freedom. The default value is None, indicating that the degrees of freedom are defined in the global coordinate system or by the userCsys parameter if defined. This parameter is available only if traction is GENERAL. When this member is queried, it returns an Int.
userCsys=GENERAL¶: A String specifying a CSYS defined by a user-subroutine. The default value is None, indicating that the degrees of freedom are defined in the global coordinate system or by the localCsys parameter if defined. This parameter is available only if traction is GENERAL.
directionVector=()¶: A tuple of two points specifying the direction of the load. Each point is specified as a point region or a tuple of coordinates. If traction is SHEAR, then directionVector will be projected onto the region surface. This parameter is available only if traction is GENERAL.
follower=1¶: A Boolean specifying whether the direction of the force changes with rotation. The default value is ON. This parameter may be modified only if traction is GENERAL. You should provide the follower argument only if it is valid for the specified step.
resultant=0¶: A Boolean specifying whether to maintain a constant resultant force by defining traction per unit undeformed area. If resultant is OFF, traction is defined per unit deformed area. The default value is OFF. You should provide the resultant argument only if it is valid for the specified step.
traction=NORMAL¶: A SymbolicConstant specifying how to apply surface traction. Possible values are NORMAL, TRANSVERSE, SHEAR, MOMENT and GENERAL. The default value is NORMAL.

返回:¶

A ShellEdgeLoad object.

返回类型:¶

ShellEdgeLoad

SubmodelSB( name, createStepName, region, globalStep, globalDrivingRegion='', absoluteExteriorTolerance=None, exteriorTolerance=0, globalIncrement=0, )[源代码]¶

This method creates a SubmodelSB object.

备注

This function can be accessed by:

mdb.models[name].SubmodelSB

备注

Check SubmodelSB on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
globalStep¶: A String specifying the step in the global model from which Abaqus reads the values of the variables that will drive the submodel analysis. The String indicates the position of the step in the sequence of analysis steps. For example, globalStep = ‘1’ indicates the first step.
globalDrivingRegion=''¶: A String specifying the element set in the global model that will be searched for elements whose responses will be used to drive the submodel. An empty string indicates that the entire global model will be searched. The default value is an empty string.
absoluteExteriorTolerance=None¶: None or a Float specifying the absolute value by which a driven node of the submodel can lie outside the region of the elements of the global model. The default value is None.
exteriorTolerance=0¶: None or a Float specifying the fraction of the average element size in the global model by which a driven node of the submodel can lie outside the region of the elements of the global model. The default value is 0.05.
globalIncrement=0¶: An Int specifying the increment number in the global model step from which the solution will be used to specify the values of the driven variables. If globalIncrement = 0, the solution from the last increment will be used. The globalIncrement argument is applicable only for linear perturbation steps. The default value is 0.

返回:¶

A SubmodelSB object.

返回类型:¶

SubmodelSB

SubstructureLoad( name, createStepName, region, loadCaseNames, magnitude, amplitude=UNSET, )[源代码]¶

This method creates a SubstructureLoad object.

备注

This function can be accessed by:

mdb.models[name].SubstructureLoad

备注

Check SubstructureLoad on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the substructure load is created.
region¶: A Region object specifying the region to which the load is applied.
loadCaseNames¶: A list of names of the load cases that should be activated by this substructure load.
magnitude¶: A Float specifying the multiplier for the load case magnitude.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A SubstructureLoad object.

返回类型:¶

SubstructureLoad

SurfaceCharge( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

This method creates a SurfaceCharge object.

备注

This function can be accessed by:

mdb.models[name].SurfaceCharge

备注

Check SurfaceCharge on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A SurfaceCharge object.

返回类型:¶

SurfaceCharge

SurfaceConcentrationFlux( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

This method creates a SurfaceConcentrationFlux object.

备注

This function can be accessed by:

mdb.models[name].SurfaceConcentrationFlux

备注

Check SurfaceConcentrationFlux on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the surface concentration flux magnitude. magnitude is optional if distributionType = USER_DEFINED.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the surface concentration flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A SurfaceConcentrationFlux object.

返回类型:¶

SurfaceConcentrationFlux

SurfaceCurrent( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

This method creates a SurfaceCurrent object.

备注

This function can be accessed by:

mdb.models[name].SurfaceCurrent

备注

Check SurfaceCurrent on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the load magnitude.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A SurfaceCurrent object.

返回类型:¶

SurfaceCurrent

SurfaceCurrentDensity( name, createStepName, region, comp1, comp2, comp3, distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

This method creates a SurfaceCurrentDensity object.

备注

This function can be accessed by:

mdb.models[name].SurfaceCurrentDensity

备注

Check SurfaceCurrentDensity on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created. This must be the first analysis step name.
region¶: A Region object specifying the region to which the load is applied.
comp1¶: A Complex specifying the first component of the load.
comp2¶: A Complex specifying the second component of the load.
comp3¶: A Complex specifying the third component of the load.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and USER_DEFINED. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A SurfaceCurrentDensity object.

返回类型:¶

SurfaceCurrentDensity

SurfaceHeatFlux( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

This method creates a SurfaceHeatFlux object.

备注

This function can be accessed by:

mdb.models[name].SurfaceHeatFlux

备注

Check SurfaceHeatFlux on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the surface heat flux magnitude. magnitude is optional if distributionType = USER_DEFINED.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the surface heat flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A SurfaceHeatFlux object.

返回类型:¶

SurfaceHeatFlux

SurfacePoreFluid( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

This method creates a SurfacePoreFluid object.

备注

This function can be accessed by:

mdb.models[name].SurfacePoreFluid

备注

Check SurfacePoreFluid on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float specifying the surface pore fluid flow magnitude. magnitude is optional if distributionType = USER_DEFINED.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying whether the load is uniform. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

返回:¶

A SurfacePoreFluid object.

返回类型:¶

SurfacePoreFluid

SurfaceTraction( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, angle=0, axis=AXIS_1, localCsys=None, userCsys='', directionVector=(), follower=1, resultant=0, traction=SHEAR, )[源代码]¶

This method creates a SurfaceTraction object.

备注

This function can be accessed by:

mdb.models[name].SurfaceTraction

备注

Check SurfaceTraction on help.3ds.com/2023.

参数:¶

name¶: A String specifying the load repository key.
createStepName¶: A String specifying the name of the step in which the load is created.
region¶: A Region object specifying the region to which the load is applied.
magnitude¶: A Float or Complex specifying the load magnitude. magnitude is optional if distributionType = USER_DEFINED.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the surface traction is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
angle=0¶: A Float specifying an additional rotation of directionVector about an axis. The default value is 0.0.
axis=AXIS_1¶: A SymbolicConstant specifying the axis about which to apply an additional rotation of directionVector. Possible values are AXIS_1, AXIS_2, and AXIS_3. The default value is AXIS_1.
localCsys=None¶: None or a DatumCsys object specifying the local coordinate system of the load’s degrees of freedom. If localCsys = None, the degrees of freedom are defined in the global coordinate system or by the userCsys parameter if defined. When this member is queried, it returns an Int. The default value is None.
userCsys=''¶: A String specifying a CSYS defined by a user-subroutine. If userCsys = None, the degrees of freedom are defined in the global coordinate system or by the localCsys parameter if defined. The default value is “None”.
directionVector=()¶: A VertexArray object of length 2 specifying the direction of the load. Instead of through a ConstrainedSketchVertex, each point may be specified through a tuple of coordinates. If traction is SHEAR, then directionVector will be projected onto the region surface. This parameter is available only if traction is GENERAL or SHEAR.
follower=1¶: A Boolean specifying whether the direction of the force changes with rotation. The default value is ON.This parameter may be modified only if traction is GENERAL. You should provide the follower argument only if it is valid for the specified step.
resultant=0¶: A Boolean specifying whether the to maintain a constant resultant force by defining traction per unit undeformed area. If resultant is OFF, traction is defined per unit deformed area. The default value is OFF.You should provide the resultant argument only if it is valid for the specified step.
traction=SHEAR¶: A SymbolicConstant specifying how to apply surface traction. Possible values are SHEAR and GENERAL. The default value is SHEAR.

返回:¶

A SurfaceTraction object.

返回类型:¶

SurfaceTraction

Other Classes¶

class BodyCharge( name, createStepName, region, magnitude, amplitude=UNSET, distributionType=UNIFORM, field='', )[源代码]¶

基类：Load

The BodyCharge object stores the data for a body charge. The BodyCharge object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check BodyCharge on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(amplitude=UNSET, distributionType=UNIFORM, field='')[源代码]¶

This method modifies the data for an existing BodyCharge object in the step where it is created.

备注

Check BodyCharge.setValues on help.3ds.com/2023.

参数:¶

amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing BodyCharge object in the specified step.

备注

Check BodyCharge.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class Load[源代码]¶

基类：object

The Load object is the abstract base type for other Load objects. The Load object has no explicit constructor. The methods and members of the Load object are common to all objects derived from Load.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check Load on help.3ds.com/2023.

Member Details:

deactivate(stepName)[源代码]¶

This method deactivates the load in the specified step and all its subsequent steps.

备注

Check Load.deactivate on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is deactivated.

delete(indices)[源代码]¶

This method allows you to delete existing loads.

备注

Check Load.delete on help.3ds.com/2023.

参数:¶

indices¶: A sequence of Ints specifying the index of each load to delete.

move(fromStepName, toStepName)[源代码]¶

This method moves the load state object from one step to a different step.

备注

Check Load.move on help.3ds.com/2023.

参数:¶

fromStepName¶: A String specifying the name of the step from which the load state is moved.
toStepName¶: A String specifying the name of the step to which the load state is moved.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

reset(stepName)[源代码]¶

This method resets the load state of the specified step to the state of the previous general analysis step.

备注

Check Load.reset on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load state is reset.

resume()[源代码]¶: This method resumes the load that was previously suppressed.

suppress()[源代码]¶: This method suppresses the load.

class BodyChargeState[源代码]¶

基类：LoadState

The BodyChargeState object stores the propagating data of a body charge in a step. One instance of this object is created internally by the BodyCharge object for each step. The instance is also deleted internally by the BodyCharge object. The BodyChargeState object has no constructor or methods. The BodyChargeState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DECHARGE

备注

Check BodyChargeState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class LoadState[源代码]¶

基类：object

The LoadState object is the abstract base type for other LoadState objects. The LoadState object has no explicit constructor or methods. The members of the LoadState object are common to all objects derived from LoadState.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

备注

Check LoadState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class BodyConcentrationFlux( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

基类：Load

The BodyConcentrationFlux object defines body concentration flux from a region or into a region. The BodyConcentrationFlux object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check BodyConcentrationFlux on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the body concentration flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(field='', distributionType=UNIFORM, amplitude=UNSET)[源代码]¶

This method modifies the data for an existing BodyConcentrationFlux object in the step where it is created.

备注

Check BodyConcentrationFlux.setValues on help.3ds.com/2023.

参数:¶

field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the body concentration flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing BodyConcentrationFlux object in the specified step.

备注

Check BodyConcentrationFlux.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the Body heat flux is modified.
magnitude=None¶: A Float specifying the Body concentration flux magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class BodyConcentrationFluxState[源代码]¶

基类：LoadState

The BodyConcentrationFluxState object stores the propagating data for a BodyConcentrationFlux object in a step. One instance of this object is created internally by the BodyConcentrationFlux object for each step. The instance is also deleted internally by the BodyConcentrationFlux object. The BodyConcentrationFluxState object has no constructor or methods. The BodyConcentrationFluxState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CFLUX

备注

Check BodyConcentrationFluxState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the body concentration flux magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the body concentration flux magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class BodyCurrent( name, createStepName, region, magnitude, amplitude=UNSET, distributionType=UNIFORM, field='', )[源代码]¶

基类：Load

The BodyCurrent object stores the data for a body current. The BodyCurrent object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check BodyCurrent on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(amplitude=UNSET, distributionType=UNIFORM, field='')[源代码]¶

This method modifies the data for an existing BodyCurrent object in the step where it is created.

备注

Check BodyCurrent.setValues on help.3ds.com/2023.

参数:¶

amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing BodyCurrent object in the specified step.

备注

Check BodyCurrent.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class BodyCurrentDensity( name, createStepName, region, comp1, comp2, comp3, amplitude=UNSET, distributionType=UNIFORM, )[源代码]¶

基类：Load

The BodyCurrentDensity object stores the data for a body current. The BodyCurrentDensity object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check BodyCurrentDensity on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and USER_DEFINED. The default value is UNIFORM.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(amplitude=UNSET, distributionType=UNIFORM)[源代码]¶

This method modifies the data for an existing BodyCurrentDensity object in the step where it is created.

备注

Check BodyCurrentDensity.setValues on help.3ds.com/2023.

参数:¶

amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and USER_DEFINED. The default value is UNIFORM.

setValuesInStep(stepName, comp1='', comp2='', comp3='', amplitude='')[源代码]¶

This method modifies the propagating data for an existing BodyCurrentDensity object in the specified step.

备注

Check BodyCurrentDensity.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
comp1=''¶: A Complex specifying the first component of the load.
comp2=''¶: A Complex specifying the second component of the load.
comp3=''¶: A Complex specifying the third component of the load.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class BodyCurrentState[源代码]¶

基类：LoadState

The BodyCurrentState object stores the propagating data of a body current in a step. One instance of this object is created internally by the BodyCurrent object for each step. The instance is also deleted internally by the BodyCurrent object. The BodyCurrentState object has no constructor or methods. The BodyCurrentState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DECURRENT

备注

Check BodyCurrentState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class BodyForce( name, createStepName, region, field='', distributionType=UNIFORM, comp1=None, comp2=None, comp3=None, amplitude=UNSET, )[源代码]¶

基类：Load

The BodyForce object defines a distributed load. The BodyForce object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

The corresponding analysis keywords are:

DLOAD

备注

Check BodyForce on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( field='', distributionType=UNIFORM, comp1=None, comp2=None, comp3=None, amplitude=UNSET, )[源代码]¶

This method modifies the data for an existing BodyForce object in the step where it is created.

备注

Check BodyForce.setValues on help.3ds.com/2023.

参数:¶

field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
comp1=None¶: A Float or a Complex specifying the body force component in the 1-direction. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero unless distributionType = USER_DEFINED.
comp2=None¶: A Float or a Complex specifying the body force component in the 2-direction.
comp3=None¶: A Float or a Complex specifying the body force component in the 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep( stepName, comp1=Ellipsis, comp2=Ellipsis, comp3=Ellipsis, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing BodyForce object in the specified step.

备注

Check BodyForce.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
comp1=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the body force component in the 1-direction. UNCHANGED should be used if the body force component is propagated from the previous analysis step.
comp2=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the body force component in the 2-direction. UNCHANGED should be used if the body force component is propagated from the previous analysis step.
comp3=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the body force component in the 3-direction. UNCHANGED should be used if the body force component is propagated from the previous analysis step.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class BodyForceState[源代码]¶

基类：LoadState

The BodyForceState object stores the propagating data of a body force in a step. One instance of this object is created internally by the BodyForce object for each step. The instance is also deleted internally by the BodyForce object. The BodyForceState object has no constructor or methods. The BodyForceState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DLOAD

备注

Check BodyForceState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the body force component in the 1-direction.

comp1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the body force component in the 1-direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

comp2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the body force component in the 2-direction.

comp2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the body force component in the 2-direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

comp3 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the body force component in the 3-direction.

comp3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the body force component in the 3-direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class BodyHeatFlux( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

基类：Load

The BodyHeatFlux object defines body heat flux from a region or into a region. The BodyHeatFlux object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check BodyHeatFlux on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the body heat flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(field='', distributionType=UNIFORM, amplitude=UNSET)[源代码]¶

This method modifies the data for an existing BodyHeatFlux object in the step where it is created.

备注

Check BodyHeatFlux.setValues on help.3ds.com/2023.

参数:¶

field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the body heat flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing BodyHeatFlux object in the specified step.

备注

Check BodyHeatFlux.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the body heat flux is modified.
magnitude=None¶: A Float specifying the body heat flux magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class BodyHeatFluxState[源代码]¶

基类：LoadState

The BodyHeatFluxState object stores the propagating data for a Body BodyHeatFlux object in a step. One instance of this object is created internally by the BodyHeatFlux object for each step. The instance is also deleted internally by the BodyHeatFlux object. The BodyHeatFluxState object has no constructor or methods. The BodyHeatFluxState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DFLUX

备注

Check BodyHeatFluxState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the Body heat flux magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the Body heat flux magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class BoltLoad( name, createStepName, region, magnitude, datumAxis, boltMethod=APPLY_FORCE, amplitude=UNSET, preTenSecPartLevel=False, )[源代码]¶

基类：Load

The BoltLoad object defines a bolt load. The BoltLoad object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

The corresponding analysis keywords are:

PRE-TENSION SECTION
- NODE
NSET

备注

Check BoltLoad on help.3ds.com/2023.

Member Details:

datumAxis : --is-rst--:py:class:`~abaqus.Datum.DatumAxis.DatumAxis` = <abaqus.Datum.DatumAxis.DatumAxis object>[源代码]¶: A DatumAxis object specifying the orientation of the pre-tension section normal. Note: datumAxis is required only for Solid and Shell regions; it has no meaning for Wire regions.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( boltMethod=APPLY_FORCE, datumAxis=None, amplitude=UNSET, preTenSecPartLevel=False, )[源代码]¶

This method modifies the data for an existing BoltLoad object in the step where it is created.

备注

Check BoltLoad.setValues on help.3ds.com/2023.

参数:¶

boltMethod=APPLY_FORCE¶: A SymbolicConstant specifying the method of applying the bolt load. Possible values are APPLY_FORCE and ADJUST_LENGTH. The default value is APPLY_FORCE.
datumAxis=None¶: A DatumAxis object specifying the orientation of the pre-tension section normal. Note: datumAxis is applicable only for Solid and Shell regions; it has no meaning for Wire regions.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
preTenSecPartLevel=False¶: A Boolean specifying whether the pre-tension section is to be defined at the part level. The default value is False. You should provide the preTenSecPartLevel argument only if the selected region belongs to a dependent part instance. A pre-tension section cannot be defined at the part level for independent and model instances.

setValuesInStep(stepName, boltMethod=APPLY_FORCE, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing BoltLoad object in the specified step.

备注

Check BoltLoad.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
boltMethod=APPLY_FORCE¶: A SymbolicConstant specifying the type of bolt load. Possible values are APPLY_FORCE, ADJUST_LENGTH, and FIX_LENGTH. The default is APPLY_FORCE.
magnitude=None¶: A Float specifying the bolt load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class BoltLoadState[源代码]¶

基类：LoadState

The BoltLoadState object stores the propagating data of a bolt load in a step. One instance of this object is created internally by the BoltLoad object for each step. The instance is also deleted internally by the BoltLoad object. The BoltLoadState object has no constructor or methods. The BoltLoadState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CLOAD
BOUNDARY

备注

Check BoltLoadState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

boltMethod : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the type of bolt load. Possible values are APPLY_FORCE, ADJUST_LENGTH, and FIX_LENGTH.

boltMethodState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the bolt load type. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the bolt load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the bolt load magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class ConcCharge( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

基类：Load

The ConcCharge object stores the data for a concentrated charge. The ConcCharge object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check ConcCharge on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(distributionType=UNIFORM, field='', amplitude=UNSET)[源代码]¶

This method modifies the data for an existing ConcCharge object in the step where it is created.

备注

Check ConcCharge.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing ConcCharge object in the specified step.

备注

Check ConcCharge.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class ConcConcFlux( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

基类：Load

The ConcConcFlux object stores the data for a concentrated concentration flux. The ConcConcFlux object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check ConcConcFlux on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(distributionType=UNIFORM, field='', amplitude=UNSET)[源代码]¶

This method modifies the data for an existing ConcConcFlux object in the step where it is created.

备注

Check ConcConcFlux.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing ConcConcFlux object in the specified step.

备注

Check ConcConcFlux.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class ConcCurrent( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

基类：Load

The ConcCurrent object stores the data for a concentrated current. The ConcCurrent object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check ConcCurrent on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(distributionType=UNIFORM, field='', amplitude=UNSET)[源代码]¶

This method modifies the data for an existing ConcCurrent object in the step where it is created.

备注

Check ConcCurrent.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing ConcCurrent object in the specified step.

备注

Check ConcCurrent.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class ConcCurrentState[源代码]¶

基类：LoadState

The ConcCurrentState object stores the propagating data of a concentrated current in a step. One instance of this object is created internally by the ConcCurrent object for each step. The instance is also deleted internally by the ConcCurrent object. The ConcCurrentState object has no constructor or methods. The ConcCurrentState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CECURRENT

备注

Check ConcCurrentState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class ConcPoreFluid( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

基类：Load

The ConcPoreFluid object stores the data for a concentrated pore fluid flow load. The ConcPoreFluid object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check ConcPoreFluid on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(distributionType=UNIFORM, field='', amplitude=UNSET)[源代码]¶

This method modifies the data for an existing ConcPoreFluid object in the step where it is created.

备注

Check ConcPoreFluid.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing ConcPoreFluid object in the specified step.

备注

Check ConcPoreFluid.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class ConcentratedChargeState[源代码]¶

基类：LoadState

The ConcentratedChargeState object stores the propagating data of a concentrated charge in a step. One instance of this object is created internally by the ConcCharge object for each step. The instance is also deleted internally by the ConcCharge object. The ConcentratedChargeState object has no constructor or methods. The ConcentratedChargeState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CECHARGE

备注

Check ConcentratedChargeState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class ConcentratedConcentrationFluxState[源代码]¶

基类：LoadState

The ConcentratedConcentrationFluxState object stores the propagating data of a concentrated concentration flux in a step. One instance of this object is created internally by the ConcConcFlux object for each step. The instance is also deleted internally by the ConcConcFlux object. The ConcentratedConcentrationFluxState object has no constructor or methods. The ConcentratedConcentrationFluxState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CFLUX

备注

Check ConcentratedConcentrationFluxState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class ConcentratedForce( name, createStepName, region, distributionType=UNIFORM, field='', cf1=None, cf2=None, cf3=None, amplitude=UNSET, follower=0, localCsys=None, )[源代码]¶

基类：Load

The ConcentratedForce object defines a concentrated force. The ConcentratedForce object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check ConcentratedForce on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

follower : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying whether the direction of the force rotates with the rotation at each node of the region. You should provide the follower argument only if it is valid for the specified step. The default value is OFF.

localCsys : --is-rst--:py:class:`int` | :py:obj:`None` = None[源代码]¶: None or a DatumCsys object specifying the local coordinate system of the load’s degrees of freedom. If localCsys = None, the degrees of freedom are defined in the global coordinate system. When this member is queried, it returns an Int. The default value is None.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( distributionType=UNIFORM, field='', cf1=None, cf2=None, cf3=None, amplitude=UNSET, follower=0, localCsys=None, )[源代码]¶

This method modifies the data for an existing ConcentratedForce object in the step where it is created.

备注

Check ConcentratedForce.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
cf1=None¶: A Float or a Complex specifying the concentrated force component in the 1-direction. Although cf1, cf2, and cf3 are optional arguments, at least one of them must be nonzero.
cf2=None¶: A Float or a Complex specifying the concentrated force component in the 2-direction.
cf3=None¶: A Float or a Complex specifying the concentrated force component in the 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
follower=0¶: A Boolean specifying whether the direction of the force rotates with the rotation at each node of the region. You should provide the follower argument only if it is valid for the specified step. The default value is OFF.
localCsys=None¶: None or a DatumCsys object specifying the local coordinate system of the load’s degrees of freedom. If localCsys = None, the degrees of freedom are defined in the global coordinate system. When this member is queried, it returns an Int. The default value is None.

setValuesInStep( stepName, cf1=Ellipsis, cf2=Ellipsis, cf3=Ellipsis, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing ConcentratedForce object in the specified step.

备注

Check ConcentratedForce.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
cf1=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the concentrated force component in the 1-direction. UNCHANGED should be used if the concentrated force component is propagated from the previous analysis step.
cf2=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the concentrated force component in the 2-direction. UNCHANGED should be used if the concentrated force component is propagated from the previous analysis step.
cf3=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the concentrated force component in the 3-direction. UNCHANGED should be used if the concentrated force component is propagated from the previous analysis step.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class ConcentratedForceState[源代码]¶

基类：LoadState

The ConcentratedForceState object stores the propagating data for a concentrated force in a step. One instance of this object is created internally by the ConcentratedForce object for each step. The instance is also deleted internally by the ConcentratedForce object. The ConcentratedForceState object has no constructor or methods. The ConcentratedForceState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CLOAD

备注

Check ConcentratedForceState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference. - NOT_YET_ACTIVE - CREATED - PROPAGATED - MODIFIED - DEACTIVATED - NO_LONGER_ACTIVE - TYPE_NOT_APPLICABLE - INSTANCE_NOT_APPLICABLE - BUILT_INTO_BASE_STATE

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

cf1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the concentrated force component in the 1-direction. Although cf1, cf2, and cf3 are optional arguments, at least one of them must be nonzero.

cf1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the concentrated force component in the 1-direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

cf2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the concentrated force component in the 2-direction.

cf2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the concentrated force component in the 2-direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

cf3 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the concentrated force component in the 3-direction.

cf3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the concentrated force component in the 3-direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

class ConcentratedHeatFlux( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, dof=11, )[源代码]¶

基类：Load

The ConcentratedHeatFlux object stores the data for a concentrated heat flux load. The ConcentratedHeatFlux object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check ConcentratedHeatFlux on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

dof : --is-rst--:py:class:`int` = 11[源代码]¶: An Int specifying the degree of freedom of the node, to which the concentrated heat flux should be applied. The default value is 11.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( distributionType=UNIFORM, field='', amplitude=UNSET, dof=11, )[源代码]¶

This method modifies the data for an existing ConcentratedHeatFlux object in the step where it is created.

备注

Check ConcentratedHeatFlux.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
dof=11¶: An Int specifying the degree of freedom of the node, to which the concentrated heat flux should be applied. The default value is 11.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing ConcentratedHeatFlux object in the specified step.

备注

Check ConcentratedHeatFlux.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class ConcentratedHeatFluxState[源代码]¶

基类：LoadState

The ConcentratedHeatFluxState object stores the propagating data of a concentrated heat flux load in a step. One instance of this object is created internally by the ConcentratedHeatFlux object for each step. The instance is also deleted internally by the ConcentratedHeatFlux object. The ConcentratedHeatFluxState object has no constructor or methods. The ConcentratedHeatFluxState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CFLUX

备注

Check ConcentratedHeatFluxState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class ConcentratedPoreFluidState[源代码]¶

基类：LoadState

The ConcentratedPoreFluidState object stores the propagating data of a concentrated pore fluid flow load in a step. One instance of this object is created internally by the ConcPoreFluid object for each step. The instance is also deleted internally by the ConcPoreFluid object. The ConcentratedPoreFluidState object has no constructor or methods. The ConcentratedPoreFluidState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CLOAD

备注

Check ConcentratedPoreFluidState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class ConnectorForce( name, createStepName, region='', fastenerName='', fastenerSetName='', f1=None, f2=None, f3=None, amplitude=UNSET, )[源代码]¶

基类：Load

The ConnectorForce object defines a connector force. The ConnectorForce object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check ConnectorForce on help.3ds.com/2023.

Member Details:

fastenerName : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the assembled fastener to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerSetName must also be specified. The default value is an empty string.

fastenerSetName : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the assembled fastener template model set to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerName must also be specified. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( region='', fastenerName='', fastenerSetName='', f1=None, f2=None, f3=None, amplitude=UNSET, )[源代码]¶

This method modifies the data for an existing ConnectorForce object in the step where it is created.

备注

Check ConnectorForce.setValues on help.3ds.com/2023.

参数:¶

region=''¶: The wire region to which the load is applied. This argument is not valid when fastenerName and fastenerSetName are specified.
fastenerName=''¶: A String specifying the name of the assembled fastener to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerSetName must also be specified. The default value is an empty string.
fastenerSetName=''¶: A String specifying the assembled fastener template model set to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerName must also be specified. The default value is an empty string.
f1=None¶: A Float or a Complex specifying the connector force component in the connector’s local 1-direction. Note: Although f1, f2, and f3 are optional arguments, at least one of them must be nonzero.
f2=None¶: A Float or a Complex specifying the connector force component in the connector’s local 2-direction.
f3=None¶: A Float or a Complex specifying the connector force component in the connector’s local 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep( stepName, f1=Ellipsis, f2=Ellipsis, f3=Ellipsis, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing ConnectorForce object in the specified step.

备注

Check ConnectorForce.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
f1=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the connector force component in the connector’s local 1-direction. UNCHANGED should be used if the connector force component is propagated from the previous analysis step.
f2=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the connector force component in the connector’s local 2-direction. UNCHANGED should be used if the connector force component is propagated from the previous analysis step.
f3=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the connector force component in the connector’s local 3-direction. UNCHANGED should be used if the connector force component is propagated from the previous analysis step.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class ConnectorForceState[源代码]¶

基类：LoadState

The ConnectorForceState object stores the propagating data for a connector force in a step. One instance of this object is created internally by the ConnectorForce object for each step. The instance is also deleted internally by the ConnectorForce object. The ConnectorForceState object has no constructor or methods. The ConnectorForceState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CONNECTOR LOAD

备注

Check ConnectorForceState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

f1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the connector force component in the connector’s local 1-direction.

f1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the connector force component in the connector’s local 1-direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

f2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the connector force component in the connector’s local 2-direction.

f2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the connector force component in the connector’s local 2-direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

f3 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the connector force component in the connector’s local 3-direction.

f3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the connector force component in the connector’s local 3-direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class ConnectorMoment( name, createStepName, region='', fastenerName='', fastenerSetName='', m1=None, m2=None, m3=None, amplitude=UNSET, )[源代码]¶

基类：Load

The ConnectorMoment object stores the data for a connector moment. The ConnectorMoment object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check ConnectorMoment on help.3ds.com/2023.

Member Details:

fastenerName : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the assembled fastener to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerSetName must also be specified. The default value is an empty string.

fastenerSetName : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the assembled fastener template model set to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerName must also be specified. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( region='', fastenerName='', fastenerSetName='', m1=None, m2=None, m3=None, amplitude=UNSET, )[源代码]¶

This method modifies the data for an existing ConnectorMoment object in the step where it is created.

备注

Check ConnectorMoment.setValues on help.3ds.com/2023.

参数:¶

region=''¶: The wire region to which the load is applied. This argument is not valid when fastenerName and fastenerSetName are specified.
fastenerName=''¶: A String specifying the name of the assembled fastener to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerSetName must also be specified. The default value is an empty string.
fastenerSetName=''¶: A String specifying the assembled fastener template model set to which the load will be applied. This argument is not valid when region is specified. When this argument is specified, fastenerName must also be specified. The default value is an empty string.
m1=None¶: A Float or a Complex specifying the moment component in the connector’s local 4-direction.
m2=None¶: A Float or a Complex specifying the moment component in the connector’s local 5-direction.
m3=None¶: A Float or a Complex specifying the moment component in the connector’s local 6-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep( stepName, m1=Ellipsis, m2=Ellipsis, m3=Ellipsis, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing ConnectorMoment object in the specified step.

备注

Check ConnectorMoment.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
m1=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the moment component in the connector’s local 4-direction. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the load component is propagated from the previous static analysis step. Use FREED to remove a previously defined load component.
m2=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the moment component in the connector’s local 5-direction. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the load component is propagated from the previous static analysis step. Use FREED to remove a previously defined load component.
m3=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the moment component in the connector’s local 6-direction. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the load component is propagated from the previous static analysis step. Use FREED to remove a previously defined load component.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class ConnectorMomentState[源代码]¶

基类：LoadState

The ConnectorMomentState object stores the propagating data for a connector moment in a step. One instance of this object is created internally by the ConnectorMoment object for each step. The instance is also deleted internally by the ConnectorMoment object. The ConnectorMomentState object has no constructor or methods. The ConnectorMomentState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CONNECTOR LOAD

备注

Check ConnectorMomentState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

m1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the connector moment component in the connector’s local 4-direction. Although m1, m2, and m3 are optional arguments, at least one of them must be nonzero.

m1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the connector’s local 4-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

m2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the connector moment component in the connector’s local 5direction.

m2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the connector’s local 5-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

m3 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the connector moment component in the connector’s local 6-direction.

m3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the connector’s local 6-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class CoriolisForce( name, createStepName, region, magnitude, point1, point2, amplitude=UNSET, distributionType=UNIFORM, field='', )[源代码]¶

基类：Load

The CoriolisForce object stores the data for a coriolis force. The CoriolisForce object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check CoriolisForce on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

point1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A tuple of Floats specifying the first point on the axis of rotation for the load.

point2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A tuple of Floats specifying the second point on the axis of rotation for the load.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(amplitude=UNSET, distributionType=UNIFORM, field='')[源代码]¶

This method modifies the data for an existing CoriolisForce object in the step where it is created.

备注

Check CoriolisForce.setValues on help.3ds.com/2023.

参数:¶

amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing CoriolisForce object in the specified step.

备注

Check CoriolisForce.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class CoriolisForceState[源代码]¶

基类：LoadState

The CoriolisForceState object stores the propagating data of a coriolis force in a step. One instance of this object is created internally by the CoriolisForce object for each step. The instance is also deleted internally by the CoriolisForce object. The CoriolisForceState object has no constructor or methods. The CoriolisForceState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DLOAD

备注

Check CoriolisForceState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class Gravity( name, createStepName, distributionType=UNIFORM, field='', region=None, comp1=None, comp2=None, comp3=None, amplitude=UNSET, )[源代码]¶

基类：Load

The Gravity object stores the data of a gravity load. The Gravity object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check Gravity on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( distributionType=UNIFORM, field='', region=None, comp1=None, comp2=None, comp3=None, amplitude=UNSET, )[源代码]¶

This method modifies the data for an existing Gravity object in the step where it is created.

备注

Check Gravity.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
region=None¶: A Region object specifying the region to which the load is applied.
comp1=None¶: A Float or a Complex specifying the component of the load in the 1-direction. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero.
comp2=None¶: A Float or a Complex specifying the component of the load in the 2-direction.
comp3=None¶: A Float or a Complex specifying the component of the load in the 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep( stepName, comp1=Ellipsis, comp2=Ellipsis, comp3=Ellipsis, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing Gravity object in the specified step.

备注

Check Gravity.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
comp1=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component in the 1-direction. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the load component is propagated from the previous static analysis step. Use FREED to remove a previously defined load component.
comp2=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component in the 2-direction. For details see comp1.
comp3=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component in the 3-direction. For details see comp1.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class GravityState[源代码]¶

基类：LoadState

The GravityState object stores the propagating data for a gravity load in a step. One instance of this object is created internally by the Gravity object for each step. The instance is also deleted internally by the Gravity object. The GravityState object has no constructor or methods. The GravityState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DLOAD

备注

Check GravityState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component in the 1-direction.

comp1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the 1-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component in the 2-direction.

comp2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the 2-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp3 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component in the 3-direction.

comp3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the 3-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class HydrostaticFluidFlowState[源代码]¶

基类：LoadState

The HydrostaticFluidFlowState object stores the propagating data for a concentrated HydrostaticFluidFlow object in a step. One instance of this object is created internally by the HydrostaticFluidFlow object for each step. The instance is also deleted internally by the HydrostaticFluidFlow object. The HydrostaticFluidFlowState object has no constructor or methods. The HydrostaticFluidFlowState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

FLUID FLUX

备注

Check HydrostaticFluidFlowState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class InertiaRelief( name, createStepName, u1=0, u2=0, u3=0, ur1=0, ur2=0, ur3=0, referencePoint=(), localCoordinates=None, )[源代码]¶

基类：Load

The InertiaRelief object defines an inertia relief load. The InertiaRelief object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check InertiaRelief on help.3ds.com/2023.

Member Details:

localCoordinates : --is-rst--:py:class:`int` | :py:obj:`None` = None[源代码]¶: None or a DatumCsys object specifying the local coordinate system of the rigid body degrees of freedom for the inertia relief load. If localCoordinates = None, the free directions are defined in the global coordinate system. When this member is queried, it returns an Int. The default value is None.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( u1=0, u2=0, u3=0, ur1=0, ur2=0, ur3=0, referencePoint=(), localCoordinates=None, )[源代码]¶

This method modifies the data for an existing InertiaRelief object in the step where it is created.

备注

Check InertiaRelief.setValues on help.3ds.com/2023.

参数:¶

u1=0¶: A Boolean specifying the 1-direction as a free direction. Note: Although u1, u2, u3, ur1, ur2, and ur3 are optional arguments, at least one of them must be specified. Further, any specified set of free directions cannot include only two rotational degrees of freedom.
u2=0¶: A Boolean specifying the 2-direction as a free direction.
u3=0¶: A Boolean specifying the 3-direction as a free direction.
ur1=0¶: A Boolean specifying the rotation about the 1-direction as a free direction.
ur2=0¶: A Boolean specifying the rotation about the 2-direction as a free direction.
ur3=0¶: A Boolean specifying the rotation about the 3-direction as a free direction.
referencePoint=()¶: A sequence of Floats specifying the X, Y and Z coordinates of a fixed rotation point or a point on the rotation axis or a point on the symmetry line, about which rotations are defined. Such a point must be specified only for certain combinations of free directions.
localCoordinates=None¶: None or a DatumCsys object specifying the local coordinate system of the rigid body degrees of freedom for the inertia relief load. If localCoordinates = None, the free directions are defined in the global coordinate system. When this member is queried, it returns an Int. The default value is None.

setValuesInStep( stepName, u1=0, u2=0, u3=0, ur1=0, ur2=0, ur3=0, referencePoint=(), fixed=0, )[源代码]¶

This method modifies the propagating data for an existing InertiaRelief object in the specified step.

备注

Check InertiaRelief.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶

A String specifying the name of the step in which the load is modified.

u1=0¶

A Boolean specifying the 1-direction as a free direction.

u2=0¶

A Boolean specifying the 2-direction as a free direction.

u3=0¶

A Boolean specifying the 3-direction as a free direction.

ur1=0¶

A Boolean specifying the rotation about the 1-direction as a free direction.

ur2=0¶

A Boolean specifying the rotation about the 2-direction as a free direction.

ur3=0¶

A Boolean specifying the rotation about the 3-direction as a free direction.

referencePoint=()¶

A sequence of Floats specifying the point about which rotations are defined. The point can be specified only for certain combinations of free directions. The referencePoint argument can be one of the following:

The X, Y and Z coordinates of a fixed rotation point.
A point on the rotation axis.
A point on the symmetry line.

fixed=0¶

A Boolean specifying whether the inertia relief loading should remain fixed at the current loading at the start of the step. The default value is OFF.

class InertiaReliefState[源代码]¶

基类：LoadState

The InertiaReliefState object stores the propagating data for an inertia relief load in a step. One instance of this object is created internally by the InertiaRelief object for each step. The instance is also deleted internally by the InertiaRelief object. The InertiaReliefState object has no constructor or methods. The InertiaReliefState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

INERTIA RELIEF

备注

Check InertiaReliefState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

fixed : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying whether the inertia relief loading should remain fixed at the current loading at the start of the step. The default value is OFF.

fixedState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the Boolean that identifies whether the inertia relief load should remain fixed at current level at the start of the step. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

referencePoint : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A tuple of Floats specifying the point about which rotations are defined. The point can be specified only for certain combinations of free directions. The referencePoint argument can be one of the following: - The X, Y and Z coordinates of a fixed rotation point. - A point on the rotation axis. - A point on the symmetry line.

referencePointState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the reference point of the inertia relief load. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

u1 : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying the 1-direction as a free direction.

u1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the Boolean that identifies the local 1-direction as a free direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

u2 : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying the 2-direction as a free direction.

u2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the Boolean that identifies the local 2-direction as a free direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

u3 : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying the 3-direction as a free direction.

u3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the Boolean that identifies the local the 3-direction as a free direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

ur1 : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying the rotation about the 1-direction as a free direction.

ur1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the Boolean that identifies rotation about the local 1-direction as a free direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

ur2 : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying the rotation about the 2-direction as a free direction.

ur2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the Boolean that identifies the rotation about the local the 2-direction as a free direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

ur3 : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying the rotation about the 3-direction as a free direction.

ur3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the Boolean that identifies the rotation about the local the 3-direction as a free direction. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

class InwardVolAccel( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

基类：Load

The InwardVolAccel object stores the data for an inward volume acceleration acoustic load. The InwardVolAccel object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check InwardVolAccel on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(distributionType=UNIFORM, field='', amplitude=UNSET)[源代码]¶

This method modifies the data for an existing InwardVolAccel object in the step where it is created.

备注

Check InwardVolAccel.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing InwardVolAccel object in the specified step.

备注

Check InwardVolAccel.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class InwardVolAccelState[源代码]¶

基类：LoadState

The InwardVolAccelState object stores the propagating data of an inward volume acceleration acoustic load in a step. One instance of this object is created internally by the InwardVolAccel object for each step. The instance is also deleted internally by the InwardVolAccel object. The InwardVolAccelState object has no constructor or methods. The InwardVolAccelState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CLOAD

备注

Check InwardVolAccelState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class LineLoad( name, createStepName, region, distributionType=UNIFORM, field='', comp1=None, comp2=None, comp3=None, amplitude=UNSET, system=GLOBAL, )[源代码]¶

基类：Load

The LineLoad object stores the data of an applied line load. The LineLoad object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check LineLoad on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( distributionType=UNIFORM, field='', comp1=None, comp2=None, comp3=None, amplitude=UNSET, system=GLOBAL, )[源代码]¶

This method modifies the data for an existing LineLoad object in the step where it is created.

备注

Check LineLoad.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
comp1=None¶: A Float or a Complex specifying the component of the load in the global or the beam local 1-direction. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero unless distributionType = USER_DEFINED.
comp2=None¶: A Float or a Complex specifying the component of the load in the global or the beam local 2-direction.
comp3=None¶: A Float or a Complex specifying the component of the load in the global 3-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
system=GLOBAL¶: A SymbolicConstant specifying whether the load is applied in a global or the beam local frame of reference. Possible values are GLOBAL and LOCAL. The default value is GLOBAL.

setValuesInStep( stepName, comp1=Ellipsis, comp2=Ellipsis, comp3=Ellipsis, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing LineLoad object in the specified step.

备注

Check LineLoad.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
comp1=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component in the global or the beam local 1-direction. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the load component is propagated from the previous static analysis step. Use FREED to remove a previously defined load component.
comp2=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component in the global or the beam local 2-direction. For details see comp1.
comp3=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component in the global 3-direction. For details see comp1.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

system : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'GLOBAL'[源代码]¶: A SymbolicConstant specifying whether the load is applied in a global or the beam local frame of reference. Possible values are GLOBAL and LOCAL. The default value is GLOBAL.

class LineLoadState[源代码]¶

基类：LoadState

The LineLoadState object stores the propagating data of a line load in a step. One instance of this object is created internally by the LineLoad object for each step. The instance is also deleted internally by the LineLoad object. The LineLoadState object has no constructor or methods. The LineLoadState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DLOAD

备注

Check LineLoadState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component in the global or the beam local 1-direction.

comp1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the global or the beam local 1-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component in the global or the beam local 2-direction.

comp2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the global or the beam local 2-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp3 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component in the global 3-direction.

comp3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the global 3-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class LoadCase(name, boundaryConditions=(), loads=(), includeActiveBaseStateBC=1)[源代码]¶

基类：object

The LoadCase object is used to define the loads and constraints comprising a particular loading condition and the linear response of a structure subjected to that loading condition.

备注

This object can be accessed by:

import step
mdb.models[name].steps[name].loadCases[name]

备注

Check LoadCase on help.3ds.com/2023.

Member Details:

resume()[源代码]¶: This method resumes the load case that was previously suppressed.

setValues(boundaryConditions=(), loads=(), includeActiveBaseStateBC=1)[源代码]¶

This method modifies the LoadCase object.

备注

Check LoadCase.setValues on help.3ds.com/2023.

参数:¶

boundaryConditions=()¶: A sequence of (String, Float) sequences specifying the name of a BoundaryCondition followed by a nonzero Float scaling factor. The default value is an empty sequence.
loads=()¶: A sequence of (String, Float) sequences specifying the name of a Load followed by a nonzero Float specifying a scale factor. The default value is an empty sequence.
includeActiveBaseStateBC=1¶: A Boolean specifying whether to include all active boundary conditions propagated or modified from the base state. The default value is ON.

suppress()[源代码]¶: This method suppresses the load case.

suppressed : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying whether the load case is suppressed or not. The default value is OFF.

class Moment( name, createStepName, region, cm1=None, cm2=None, cm3=None, amplitude=UNSET, follower=0, localCsys=None, distributionType=UNIFORM, field='', )[源代码]¶

基类：Load

The Moment object stores the data for a moment. The Moment object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check Moment on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

follower : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying whether the direction of the force rotates with the rotation of the node. You should provide the follower argument only if it is valid for the specified step. The default value is OFF.

localCsys : --is-rst--:py:class:`int` | :py:obj:`None` = None[源代码]¶: None or a DatumCsys object specifying the ID of the Datum coordinate system used as the local coordinate system of the load. If localCsys = None, the load is defined in the global coordinate system. When this member is queried, it returns an Int. The default value is None.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( cm1=None, cm2=None, cm3=None, amplitude=UNSET, follower=0, localCsys=None, distributionType=UNIFORM, field='', )[源代码]¶

This method modifies the data for an existing Moment object in the step where it is created.

备注

Check Moment.setValues on help.3ds.com/2023.

参数:¶

cm1=None¶: A Float or a Complex specifying the load component in the 4-direction. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero.
cm2=None¶: A Float or a Complex specifying the load component in the 5- direction.
cm3=None¶: A Float or a Complex specifying the load component in the 6-direction.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
follower=0¶: A Boolean specifying whether the direction of the force rotates with the rotation of the node. You should provide the follower argument only if it is valid for the specified step. The default value is OFF.
localCsys=None¶: None or a DatumCsys object specifying the ID of the Datum coordinate system used as the local coordinate system of the load. If localCsys = None, the load is defined in the global coordinate system. When this member is queried, it returns an Int. The default value is None.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

setValuesInStep( stepName, comp1=Ellipsis, comp2=Ellipsis, comp3=Ellipsis, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing Moment object in the specified step.

备注

Check Moment.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
comp1=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component in the 4-direction. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the load component is propagated from the previous static analysis step. Use FREED to remove a previously defined load component.
comp2=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component in the 5-direction. For details see comp1.
comp3=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component in the 6-direction. For details see comp1.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class PEGLoad( name, createStepName, region, distributionType=UNIFORM, field='', comp1=None, comp2=None, comp3=None, amplitude=UNSET, )[源代码]¶

基类：Load

The PEGLoad object stores the data for a PEG load. The PEGLoad object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check PEGLoad on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( distributionType=UNIFORM, field='', comp1=None, comp2=None, comp3=None, amplitude=UNSET, )[源代码]¶

This method modifies the data for an existing PEGLoad object in the step where it is created.

备注

Check PEGLoad.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
comp1=None¶: A Float or a Complex specifying the load component at dof 1 of reference node 1. Note: Although comp1, comp2, and comp3 are optional arguments, at least one of them must be nonzero.
comp2=None¶: A Float or a Complex specifying the load component at dof 1 of reference node 2.
comp3=None¶: A Float or a Complex specifying the load component at dof 2 of reference node 2.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep( stepName, comp1=Ellipsis, comp2=Ellipsis, comp3=Ellipsis, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing PEGLoad object in the specified step.

备注

Check PEGLoad.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
comp1=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component at dof 1 of reference node 1. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the load component is propagated from the previous static analysis step. Use FREED to remove a previously defined load component.
comp2=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component at dof 1 of reference node 2. For details see comp1.
comp3=Ellipsis¶: A Float, a Complex, or a SymbolicConstant specifying the load component at dof 2 of reference node 2. For details see comp1.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class PipePressure( name, createStepName, region, magnitude, diameter, hZero, hReference, field='', amplitude=UNSET, distributionType=UNIFORM, side=INTERNAL, )[源代码]¶

基类：Load

The PipePressure object stores the data for a pressure applied to pipe or elbow elements. The PipePressure object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check PipePressure on help.3ds.com/2023.

Member Details:

diameter : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the effective inner or outer diameter.

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying whether the load is uniform. Possible values are UNIFORM, HYDROSTATIC, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(field='', amplitude=UNSET, distributionType=UNIFORM, side=INTERNAL)[源代码]¶

This method modifies the data for an existing PipePressure object in the step where it is created.

备注

Check PipePressure.setValues on help.3ds.com/2023.

参数:¶

field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
distributionType=UNIFORM¶: A SymbolicConstant specifying whether the load is uniform. Possible values are UNIFORM, HYDROSTATIC, USER_DEFINED, and FIELD. The default value is UNIFORM.
side=INTERNAL¶: A SymbolicConstant specifying whether the pressure is applied internally or externally. Possible values are INTERNAL and EXTERNAL. The default value is INTERNAL.

setValuesInStep( stepName, magnitude=None, hZero=None, hReference=None, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing PipePressure object in the specified step.

备注

Check PipePressure.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the pressure magnitude.
hZero=None¶: A Float specifying the height of the zero pressure level when distributionType = HYDROSTATIC.
hReference=None¶: A Float specifying the height of the reference pressure level when distributionType = HYDROSTATIC.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

side : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'INTERNAL'[源代码]¶: A SymbolicConstant specifying whether the pressure is applied internally or externally. Possible values are INTERNAL and EXTERNAL. The default value is INTERNAL.

class Pressure( name, createStepName, region, magnitude=0.0, hZero=0.0, hReference=0.0, field='', refPoint='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

基类：Load

The Pressure object defines a pressure load. The Pressure object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check Pressure on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the pressure is distributed spatially. Possible values are UNIFORM, USER_DEFINED, FIELD, HYDROSTATIC, STAGNATION, VISCOUS, TOTAL_FORCE, and DISCRETE_FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField or DiscreteField object associated with this load. The field argument applies only when distributionType = FIELD or distributionType = DISCRETE_FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(field='', refPoint='', distributionType=UNIFORM, amplitude=UNSET)[源代码]¶

This method modifies the data for an existing Pressure object in the step where it is created.

备注

Check Pressure.setValues on help.3ds.com/2023.

参数:¶

field=''¶: A String specifying the name of the AnalyticalField or DiscreteField object associated with this load. The field argument applies only when distributionType = FIELD or distributionType = DISCRETE_FIELD. The default value is an empty string.
refPoint=''¶: A Region specifying the reference point from which the relative velocity is determined when distributionType = STAGNATION or VISCOUS.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the pressure is distributed spatially. Possible values are UNIFORM, USER_DEFINED, FIELD, HYDROSTATIC, STAGNATION, VISCOUS, TOTAL_FORCE, and DISCRETE_FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep( stepName, magnitude=None, hZero=None, hReference=None, amplitude='', )[源代码]¶

This method modifies the propagating data for an existing Pressure object in the specified step.

备注

Check Pressure.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float or a Complex specifying the pressure magnitude.
hZero=None¶: A Float specifying the height of the zero pressure level when distributionType = HYDROSTATIC.
hReference=None¶: A Float specifying the height of the reference pressure level when distributionType = HYDROSTATIC.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class RotationalBodyForce( name, createStepName, region, magnitude, point1, point2, distributionType=UNIFORM, field='', centrifugal=0, rotaryAcceleration=0, amplitude=UNSET, )[源代码]¶

基类：Load

The RotationalBodyForce object stores the data for a rotational body force. The RotationalBodyForce object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check RotationalBodyForce on help.3ds.com/2023.

Member Details:

centrifugal : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying whether or not the effect of the load is centrifugal. The default value is OFF. Note: At least one of centrifugal or rotaryAcceleration must be specified and only one must have the value ON.

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

point1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A tuple of Floats specifying the first point on the axis of rotation for the load.

point2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A tuple of Floats specifying the second point on the axis of rotation for the load.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

rotaryAcceleration : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying whether or not the effect of the load is rotary acceleration. The default value is OFF. Note: At least one of centrifugal or rotaryAcceleration must be specified and only one must have the value ON.

setValues( distributionType=UNIFORM, field='', centrifugal=0, rotaryAcceleration=0, amplitude=UNSET, )[源代码]¶

This method modifies the data for an existing RotationalBodyForce object in the step where it is created.

备注

Check RotationalBodyForce.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
centrifugal=0¶: A Boolean specifying whether or not the effect of the load is centrifugal. The default value is OFF. Note: At least one of centrifugal or rotaryAcceleration must be specified and only one must have the value ON.
rotaryAcceleration=0¶: A Boolean specifying whether or not the effect of the load is rotary acceleration. The default value is OFF. Note: At least one of centrifugal or rotaryAcceleration must be specified and only one must have the value ON.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing RotationalBodyForce object in the specified step.

备注

Check RotationalBodyForce.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class ShellEdgeLoad( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, angle=0, axis=AXIS_1, localCsys=GENERAL, userCsys=GENERAL, directionVector=(), follower=1, resultant=0, traction=NORMAL, )[源代码]¶

基类：Load

The ShellEdgeLoad object defines shell edge loads on a region. The ShellEdgeLoad object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check ShellEdgeLoad on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the shell edge load is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( distributionType=UNIFORM, field='', amplitude=UNSET, angle=0, axis=AXIS_1, localCsys=GENERAL, userCsys=GENERAL, directionVector=(), follower=1, resultant=0, traction=NORMAL, )[源代码]¶

This method modifies the data for an existing ShellEdgeLoad object in the step where it is created.

备注

Check ShellEdgeLoad.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the shell edge load is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
angle=0¶: A Float specifying an additional rotation of directionVector about an axis. The default value is 0.This parameter is available only if traction is GENERAL.
axis=AXIS_1¶: A SymbolicConstant specifying the axis about which to apply an additional rotation of directionVector. Possible values are AXIS_1, AXIS_2, AXIS_3. The default value is AXIS_1.This parameter is available only if traction is GENERAL.
localCsys=GENERAL¶: A DatumCsys object specifying the local coordinate system of the load’s degrees of freedom. The default value is None, indicating that the degrees of freedom are defined in the global coordinate system or by the userCsys parameter if defined. This parameter is available only if traction is GENERAL. When this member is queried, it returns an Int.
userCsys=GENERAL¶: A String specifying a CSYS defined by a user-subroutine. The default value is None, indicating that the degrees of freedom are defined in the global coordinate system or by the localCsys parameter if defined. This parameter is available only if traction is GENERAL.
directionVector=()¶: A tuple of two points specifying the direction of the load. Each point is specified as a point region or a tuple of coordinates. If traction is SHEAR, then directionVector will be projected onto the region surface. This parameter is available only if traction is GENERAL.
follower=1¶: A Boolean specifying whether the direction of the force changes with rotation. The default value is ON. This parameter may be modified only if traction is GENERAL. You should provide the follower argument only if it is valid for the specified step.
resultant=0¶: A Boolean specifying whether to maintain a constant resultant force by defining traction per unit undeformed area. If resultant is OFF, traction is defined per unit deformed area. The default value is OFF. You should provide the resultant argument only if it is valid for the specified step.
traction=NORMAL¶: A SymbolicConstant specifying how to apply surface traction. Possible values are NORMAL, TRANSVERSE, SHEAR, MOMENT and GENERAL. The default value is NORMAL.

setValuesInStep(stepName, magnitude=Ellipsis, amplitude='')[源代码]¶

This method modifies the propagating data for an existing ShellEdgeLoad object in the specified step.

备注

Check ShellEdgeLoad.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the surface pore fluid flow is modified.
magnitude=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the load magnitude. UNCHANGED should be used if the magnitude is propagated from the previous analysis step.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class SubmodelSB( name, createStepName, region, globalStep, globalDrivingRegion='', absoluteExteriorTolerance=None, exteriorTolerance=0, globalIncrement=0, )[源代码]¶

基类：Load

The SubmodelSB object stores the data for a submodel surface based load. The SubmodelSB object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check SubmodelSB on help.3ds.com/2023.

Member Details:

absoluteExteriorTolerance : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: None or a Float specifying the absolute value by which a driven node of the submodel can lie outside the region of the elements of the global model. The default value is None.

exteriorTolerance : --is-rst--:py:class:`float` = 0[源代码]¶: None or a Float specifying the fraction of the average element size in the global model by which a driven node of the submodel can lie outside the region of the elements of the global model. The default value is 0.05.

globalDrivingRegion : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the element set in the global model that will be searched for elements whose responses will be used to drive the submodel. An empty string indicates that the entire global model will be searched. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues( globalDrivingRegion='', absoluteExteriorTolerance=None, exteriorTolerance=0, globalIncrement=0, )[源代码]¶

This method modifies the data for an existing SubmodelSB object in the step where it is created.

备注

Check SubmodelSB.setValues on help.3ds.com/2023.

参数:¶

globalDrivingRegion=''¶: A String specifying the element set in the global model that will be searched for elements whose responses will be used to drive the submodel. An empty string indicates that the entire global model will be searched. The default value is an empty string.
absoluteExteriorTolerance=None¶: None or a Float specifying the absolute value by which a driven node of the submodel can lie outside the region of the elements of the global model. The default value is None.
exteriorTolerance=0¶: None or a Float specifying the fraction of the average element size in the global model by which a driven node of the submodel can lie outside the region of the elements of the global model. The default value is 0.05.
globalIncrement=0¶: An Int specifying the increment number in the global model step from which the solution will be used to specify the values of the driven variables. If globalIncrement = 0, the solution from the last increment will be used. The globalIncrement argument is applicable only for linear perturbation steps. The default value is 0.

setValuesInStep(stepName, fixed=1, globalStep='', globalIncrement=0)[源代码]¶

This method modifies the propagating data for an existing SubmodelSB object in the specified step.

备注

Check SubmodelSB.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
fixed=1¶: A Boolean specifying whether the load should remain fixed at the current values at the start of the step. The default value is ON.
globalStep=''¶: A String specifying the step in the global model from which Abaqus reads the values of the variables that will drive the submodel analysis. The String indicates the position of the step in the sequence of analysis steps. For example, globalStep = ‘1’ indicates the first step. The globalStep argument is applicable only if fixed = OFF.
globalIncrement=0¶: An Int specifying the increment number in the global model step at which the solution will be used to specify the values of the driven variables. If globalIncrement = 0, the solution from the last increment will be used. The globalIncrement argument is applicable only for linear perturbation steps and if fixed = OFF. The default value is 0.

class SubstructureLoad(name, createStepName, region, loadCaseNames, magnitude, amplitude=UNSET)[源代码]¶

基类：Load

The SubstructureLoad object defines a substructure load. The SubstructureLoad object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check SubstructureLoad on help.3ds.com/2023.

Member Details:

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(amplitude=UNSET)[源代码]¶

This method modifies the data for an existing SubstructureLoad object in the step where it is created.

备注

Check SubstructureLoad.setValues on help.3ds.com/2023.

参数:¶

amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, loadCaseNames='', magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing SubstructureLoad object in the specified step.

备注

Check SubstructureLoad.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
loadCaseNames=''¶: A list of names of the load cases that should be activated by this substructure load.
magnitude=None¶: A Float specifying the multiplier for the load case magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class SurfaceCharge( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

基类：Load

The SurfaceCharge object stores the data for a surface charge. The SurfaceCharge object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check SurfaceCharge on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(distributionType=UNIFORM, field='', amplitude=UNSET)[源代码]¶

This method modifies the data for an existing SurfaceCharge object in the step where it is created.

备注

Check SurfaceCharge.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing SurfaceCharge object in the specified step.

备注

Check SurfaceCharge.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class SurfaceConcentrationFlux( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

基类：Load

The SurfaceConcentrationFlux object defines surface concentration flux from a region or into a region. The SurfaceConcentrationFlux object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check SurfaceConcentrationFlux on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the surface concentration flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(field='', distributionType=UNIFORM, amplitude=UNSET)[源代码]¶

This method modifies the data for an existing SurfaceConcentrationFlux object in the step where it is created.

备注

Check SurfaceConcentrationFlux.setValues on help.3ds.com/2023.

参数:¶

field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the surface concentration flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing SurfaceConcentrationFlux object in the specified step.

备注

Check SurfaceConcentrationFlux.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the surface concentration flux is modified.
magnitude=None¶: A Float specifying the surface concentration flux magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class SurfaceCurrent( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, )[源代码]¶

基类：Load

The SurfaceCurrent object stores the data for a surface current. The SurfaceCurrent object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check SurfaceCurrent on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(distributionType=UNIFORM, field='', amplitude=UNSET)[源代码]¶

This method modifies the data for an existing SurfaceCurrent object in the step where it is created.

备注

Check SurfaceCurrent.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing SurfaceCurrent object in the specified step.

备注

Check SurfaceCurrent.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=None¶: A Float specifying the load magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class SurfaceCurrentDensity( name, createStepName, region, comp1, comp2, comp3, distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

基类：Load

The SurfaceCurrentDensity object stores the data for a surface current. The SurfaceCurrentDensity object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check SurfaceCurrentDensity on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and USER_DEFINED. The default value is UNIFORM.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(distributionType=UNIFORM, amplitude=UNSET)[源代码]¶

This method modifies the data for an existing SurfaceCurrentDensity object in the step where it is created.

备注

Check SurfaceCurrentDensity.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the load is distributed spatially. Possible values are UNIFORM and USER_DEFINED. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep( stepName, comp1='', comp2='', comp3='', amplitude='', )[源代码]¶

This method modifies the propagating data for an existing SurfaceCurrentDensity object in the specified step.

备注

Check SurfaceCurrentDensity.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
comp1=''¶: A Complex specifying the first component of the load.
comp2=''¶: A Complex specifying the second component of the load.
comp3=''¶: A Complex specifying the third component of the load.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous static analysis step. FREED should be used if the load is changed to have no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class SurfaceHeatFlux( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

基类：Load

The SurfaceHeatFlux object defines surface heat flux from a region or into a region. The SurfaceHeatFlux object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check SurfaceHeatFlux on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the surface heat flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(field='', distributionType=UNIFORM, amplitude=UNSET)[源代码]¶

This method modifies the data for an existing SurfaceHeatFlux object in the step where it is created.

备注

Check SurfaceHeatFlux.setValues on help.3ds.com/2023.

参数:¶

field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying how the surface heat flux is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing SurfaceHeatFlux object in the specified step.

备注

Check SurfaceHeatFlux.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the surface heat flux is modified.
magnitude=None¶: A Float specifying the surface heat flux magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class SurfacePoreFluid( name, createStepName, region, magnitude, field='', distributionType=UNIFORM, amplitude=UNSET, )[源代码]¶

基类：Load

The SurfacePoreFluid object defines surface pore fluid flow from a region or into a region. The SurfacePoreFluid object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check SurfacePoreFluid on help.3ds.com/2023.

Member Details:

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying whether the load is uniform. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

setValues(field='', distributionType=UNIFORM, amplitude=UNSET)[源代码]¶

This method modifies the data for an existing SurfacePoreFluid object in the step where it is created.

备注

Check SurfacePoreFluid.setValues on help.3ds.com/2023.

参数:¶

field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
distributionType=UNIFORM¶: A SymbolicConstant specifying whether the load is uniform. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.

setValuesInStep(stepName, magnitude=None, amplitude='')[源代码]¶

This method modifies the propagating data for an existing SurfacePoreFluid object in the specified step.

备注

Check SurfacePoreFluid.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the surface pore fluid flow is modified.
magnitude=None¶: A Float specifying the surface pore fluid flow magnitude.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

class SurfaceTraction( name, createStepName, region, magnitude, distributionType=UNIFORM, field='', amplitude=UNSET, angle=0, axis=AXIS_1, localCsys=None, userCsys='', directionVector=(), follower=1, resultant=0, traction=SHEAR, )[源代码]¶

基类：Load

The SurfaceTraction object defines surface traction on a region. The SurfaceTraction object is derived from the Load object.

备注

This object can be accessed by:

import load
mdb.models[name].loads[name]

备注

Check SurfaceTraction on help.3ds.com/2023.

Member Details:

angle : --is-rst--:py:class:`float` = 0[源代码]¶: A Float specifying an additional rotation of directionVector about an axis. The default value is 0.0.

axis : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'AXIS_1'[源代码]¶: A SymbolicConstant specifying the axis about which to apply an additional rotation of directionVector. Possible values are AXIS_1, AXIS_2, and AXIS_3. The default value is AXIS_1.

directionVector : --is-rst--:py:class:`tuple` = ()[源代码]¶: A VertexArray object of length 2 specifying the direction of the load. Instead of through a ConstrainedSketchVertex, each point may be specified through a tuple of coordinates. If traction is SHEAR, then directionVector will be projected onto the region surface. This parameter is available only if traction is GENERAL or SHEAR.

distributionType : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'UNIFORM'[源代码]¶: A SymbolicConstant specifying how the surface traction is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.

field : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.

follower : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 1[源代码]¶: A Boolean specifying whether the direction of the force changes with rotation. The default value is ON.This parameter may be modified only if traction is GENERAL. You should provide the follower argument only if it is valid for the specified step.

localCsys : --is-rst--:py:class:`int` | :py:obj:`None` = None[源代码]¶: None or a DatumCsys object specifying the local coordinate system of the load’s degrees of freedom. If localCsys = None, the degrees of freedom are defined in the global coordinate system or by the userCsys parameter if defined. When this member is queried, it returns an Int. The default value is None.

name : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the load repository key.

region : --is-rst--:py:class:`~abaqus.Region.Region.Region` = <abaqus.Region.Region.Region object>[源代码]¶: A Region object specifying the region to which the load is applied.

resultant : --is-rst--:py:data:`~typing.Union`\ \[:py:class:`~abaqus.UtilityAndView.AbaqusBoolean.AbaqusBoolean`, :py:class:`bool`] = 0[源代码]¶: A Boolean specifying whether the to maintain a constant resultant force by defining traction per unit undeformed area. If resultant is OFF, traction is defined per unit deformed area. The default value is OFF.You should provide the resultant argument only if it is valid for the specified step.

setValues( distributionType=UNIFORM, field='', amplitude=UNSET, angle=0, axis=AXIS_1, localCsys=None, userCsys='', directionVector=(), follower=1, resultant=0, traction=SHEAR, )[源代码]¶

This method modifies the data for an existing SurfaceTraction object in the step where it is created.

备注

Check SurfaceTraction.setValues on help.3ds.com/2023.

参数:¶

distributionType=UNIFORM¶: A SymbolicConstant specifying how the surface traction is distributed spatially. Possible values are UNIFORM, USER_DEFINED, and FIELD. The default value is UNIFORM.
field=''¶: A String specifying the name of the AnalyticalField object associated with this load. The field argument applies only when distributionType = FIELD. The default value is an empty string.
amplitude=UNSET¶: A String or the SymbolicConstant UNSET specifying the name of the amplitude reference. UNSET should be used if the load has no amplitude reference. The default value is UNSET. You should provide the amplitude argument only if it is valid for the specified step.
angle=0¶: A Float specifying an additional rotation of directionVector about an axis. The default value is 0.0.
axis=AXIS_1¶: A SymbolicConstant specifying the axis about which to apply an additional rotation of directionVector. Possible values are AXIS_1, AXIS_2, and AXIS_3. The default value is AXIS_1.
localCsys=None¶: None or a DatumCsys object specifying the local coordinate system of the load’s degrees of freedom. If localCsys = None, the degrees of freedom are defined in the global coordinate system or by the userCsys parameter if defined. When this member is queried, it returns an Int. The default value is None.
userCsys=''¶: A String specifying a CSYS defined by a user-subroutine. If userCsys = None, the degrees of freedom are defined in the global coordinate system or by the localCsys parameter if defined. The default value is “None”.
directionVector=()¶: A VertexArray object of length 2 specifying the direction of the load. Instead of through a ConstrainedSketchVertex, each point may be specified through a tuple of coordinates. If traction is SHEAR, then directionVector will be projected onto the region surface. This parameter is available only if traction is GENERAL or SHEAR.
follower=1¶: A Boolean specifying whether the direction of the force changes with rotation. The default value is ON.This parameter may be modified only if traction is GENERAL. You should provide the follower argument only if it is valid for the specified step.
resultant=0¶: A Boolean specifying whether the to maintain a constant resultant force by defining traction per unit undeformed area. If resultant is OFF, traction is defined per unit deformed area. The default value is OFF.You should provide the resultant argument only if it is valid for the specified step.
traction=SHEAR¶: A SymbolicConstant specifying how to apply surface traction. Possible values are SHEAR and GENERAL. The default value is SHEAR.

setValuesInStep(stepName, magnitude=Ellipsis, amplitude='')[源代码]¶

This method modifies the propagating data for an existing SurfaceTraction object in the specified step.

备注

Check SurfaceTraction.setValuesInStep on help.3ds.com/2023.

参数:¶

stepName¶: A String specifying the name of the step in which the load is modified.
magnitude=Ellipsis¶: A Float, a Complex, or the SymbolicConstant UNCHANGED specifying the load magnitude. UNCHANGED should be used if the magnitude is propagated from the previous analysis step.
amplitude=''¶: A String or a SymbolicConstant specifying the name of the amplitude reference. Possible values for the SymbolicConstant are UNCHANGED and FREED. UNCHANGED should be used if the amplitude is propagated from the previous analysis step. FREED should be used if the load has no amplitude reference. You should provide the amplitude argument only if it is valid for the specified step.

traction : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant` = 'SHEAR'[源代码]¶: A SymbolicConstant specifying how to apply surface traction. Possible values are SHEAR and GENERAL. The default value is SHEAR.

userCsys : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying a CSYS defined by a user-subroutine. If userCsys = None, the degrees of freedom are defined in the global coordinate system or by the localCsys parameter if defined. The default value is “None”.

class LoadStep[源代码]¶

基类：StepBase

Member Details:

LoadCase(name, boundaryConditions=(), loads=(), includeActiveBaseStateBC=1)[源代码]¶

This method creates a load case in a step.

备注

This function can be accessed by:

mdb.models[name].steps[name].LoadCase

备注

Check LoadCase on help.3ds.com/2023.

参数:¶

name¶: A String specifying the name of the object.
boundaryConditions=()¶: A sequence of (String, Float) sequences specifying the name of a BoundaryCondition followed by a nonzero Float scaling factor. The default value is an empty sequence.
loads=()¶: A sequence of (String, Float) sequences specifying the name of a Load followed by a nonzero Float specifying a scale factor. The default value is an empty sequence.
includeActiveBaseStateBC=1¶: A Boolean specifying whether to include all active boundary conditions propagated or modified from the base state. The default value is ON.

返回:¶

A LoadCase object.

返回类型:¶

LoadCase

抛出:¶

RangeError –

class MomentState[源代码]¶

基类：LoadState

The MomentState object stores the propagating data for a moment in a step. One instance of this object is created internally by the Moment object for each step. The instance is also deleted internally by the Moment object. The MomentState object has no constructor or methods. The MomentState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CLOAD

备注

Check MomentState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

cm1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component in the 4-direction.

cm1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the 4-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

cm2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component in the 5-direction.

cm2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the 5-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

cm3 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component in the 6-direction.

cm3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component in the 6-direction. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class PEGLoadState[源代码]¶

基类：LoadState

The PEGLoadState object stores the propagating data for a concentrated force in a step. One instance of this object is created internally by the PEGLoad object for each step. The instance is also deleted internally by the PEGLoad object. The PEGLoadState object has no constructor or methods. The PEGLoadState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

CLOAD

备注

Check PEGLoadState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp1 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component at dof 1 of reference node 1.

comp1State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component at dof 1 of reference node 1. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp2 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component at dof 1 of reference node 2.

comp2State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component at dof 1 of reference node 2. Possible values are UNSET, SET, UNCHANGED, and FREED.

comp3 : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load component at dof 2 of reference node 2.

comp3State : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load component at dof 2 of reference node 2. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class PipePressureState[源代码]¶

基类：LoadState

The PipePressureState object stores the propagating data for a pipe pressure in a step. One instance of this object is created internally by the PipePressure object for each step. The instance is also deleted internally by the PipePressure object. The PipePressureState object has no constructor or methods. The PipePressureState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DSLOAD
DLOAD

备注

Check PipePressureState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

hReference : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the height of the reference pressure level when the pipe pressure distributionType = HYDROSTATIC.

hReferenceState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of hReference. Possible values are UNSET, SET, UNCHANGED, and FREED.

hZero : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the height of the zero pressure level when the pipe pressure distributionType = HYDROSTATIC.

hZeroState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of hZero. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class PressureState[源代码]¶

基类：LoadState

The PressureState object stores the propagating data for a pressure in a step. One instance of this object is created internally by the Pressure object for each step. The instance is also deleted internally by the Pressure object. The PressureState object has no constructor or methods. The PressureState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DSLOAD
DLOAD

备注

Check PressureState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

hReference : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the height of the reference pressure level when the pressure distributionType = HYDROSTATIC.

hReferenceState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of hReference. Possible values are UNSET, SET, UNCHANGED, and FREED.

hZero : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the height of the zero pressure level when the pressure distributionType = HYDROSTATIC.

hZeroState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of hZero. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the pressure magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the pressure magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class RotationalBodyForceState[源代码]¶

基类：LoadState

The RotationalBodyForceState object stores the propagating data of a rotational body force in a step. One instance of this object is created internally by the RotationalBodyForce object for each step. The instance is also deleted internally by the RotationalBodyForce object. The RotationalBodyForceState object has no constructor or methods. The RotationalBodyForceState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DLOAD

备注

Check RotationalBodyForceState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class ShellEdgeLoadState[源代码]¶

基类：LoadState

The ShellEdgeLoadState object stores the propagating data for a ShellEdgeLoad object in a step. One instance of this object is created internally by the ShellEdgeLoad object for each step. The instance is also deleted internally by the ShellEdgeLoad object. The ShellEdgeLoadState object has no constructor or methods. The ShellEdgeLoadState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DSLOAD
DLOAD

备注

Check ShellEdgeLoadState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class SubmodelSBState[源代码]¶

基类：LoadState

The SubmodelSBState object stores the propagating data for a Submodel load in a step. One instance of this object is created internally by the SubmodelSB object for each step. The instance is also deleted internally by the SubmodelSB object. The SubmodelSBState object has no constructor or methods. The SubmodelSBState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

SUBMODEL
DSLOAD

备注

Check SubmodelSBState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

globalIncrement : --is-rst--:py:class:`int` | :py:obj:`None` = None[源代码]¶: An Int specifying the increment number in the global model step at which the solution will be used to specify the values of the driven variables. This argument is applicable only for linear perturbation steps.

globalIncrementState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the globalIncrement member. Possible values are SET and UNCHANGED.

globalStep : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the step in the global model from which Abaqus reads the values of the variables that will drive the submodel analysis. The String indicates the position of the step in the sequence of analysis steps. For example, globalStep = ‘1’ indicates the first step.

globalStepState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the globalStep member. Possible values are SET and UNCHANGED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class SubstructureLoadState[源代码]¶

基类：LoadState

The SubstructureLoadState object stores the propagating data for a substructure load in a step. One instance of this object is created internally by the SubstructureLoad object for each step. The instance is also deleted internally by the SubstructureLoad object. The SubstructureLoadState object has no constructor or methods. The SubstructureLoadState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

SLOAD

备注

Check SubstructureLoadState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

loadCaseNames : --is-rst--:py:class:`tuple` = ()[源代码]¶: A tuple of strings specifying the names of the load cases to be activated.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class SurfaceChargeState[源代码]¶

基类：LoadState

The SurfaceChargeState object stores the propagating data of a surface charge in a step. One instance of this object is created internally by the SurfaceCharge object for each step. The instance is also deleted internally by the SurfaceCharge object. The SurfaceChargeState object has no constructor or methods. The SurfaceChargeState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DSECHARGE

备注

Check SurfaceChargeState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class SurfaceConcentrationFluxState[源代码]¶

基类：LoadState

The SurfaceConcentrationFluxState object stores the propagating data for a SurfaceConcentrationFlux object in a step. One instance of this object is created internally by the SurfaceConcentrationFlux object for each step. The instance is also deleted internally by the SurfaceConcentrationFlux object. The SurfaceConcentrationFluxState object has no constructor or methods. The SurfaceConcentrationFluxState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DSFLUX

备注

Check SurfaceConcentrationFluxState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the surface concentration flux magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the surface concentration flux magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class SurfaceCurrentState[源代码]¶

基类：LoadState

The SurfaceCurrentState object stores the propagating data of a surface current in a step. One instance of this object is created internally by the SurfaceCurrent object for each step. The instance is also deleted internally by the SurfaceCurrent object. The SurfaceCurrentState object has no constructor or methods. The SurfaceCurrentState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DSECURRENT

备注

Check SurfaceCurrentState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and FREED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class SurfaceHeatFluxState[源代码]¶

基类：LoadState

The SurfaceHeatFluxState object stores the propagating data for a surface SurfaceHeatFlux object in a step. One instance of this object is created internally by the SurfaceHeatFlux object for each step. The instance is also deleted internally by the SurfaceHeatFlux object. The SurfaceHeatFluxState object has no constructor or methods. The SurfaceHeatFluxState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DSFLUX

备注

Check SurfaceHeatFluxState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the surface heat flux magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the surface heat flux magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class SurfacePoreFluidState[源代码]¶

基类：LoadState

The SurfacePoreFluidState object stores the propagating data for a SurfacePoreFluid object in a step. One instance of this object is created internally by the SurfacePoreFluid object for each step. The instance is also deleted internally by the SurfacePoreFluid object. The SurfacePoreFluidState object has no constructor or methods. The SurfacePoreFluidState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DSFLOW

备注

Check SurfacePoreFluidState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float specifying the surface pore fluid flow magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the surface pore fluid flow magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE

class SurfaceTractionState[源代码]¶

基类：LoadState

The SurfaceTractionState object stores the propagating data for a SurfaceTraction object in a step. One instance of this object is created internally by the SurfaceTraction object for each step. The instance is also deleted internally by the SurfaceTraction object. The SurfaceTractionState object has no constructor or methods. The SurfaceTractionState object is derived from the LoadState object.

备注

This object can be accessed by:

import load
mdb.models[name].steps[name].loadStates[name]

The corresponding analysis keywords are:

DSLOAD
DLOAD

备注

Check SurfaceTractionState on help.3ds.com/2023.

Member Details:

amplitude : --is-rst--:py:class:`str` = ''[源代码]¶: A String specifying the name of the amplitude reference. The String is empty if the load has no amplitude reference.

amplitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the amplitude member. Possible values are UNSET, SET, UNCHANGED, and FREED.

magnitude : --is-rst--:py:class:`float` | :py:obj:`None` = None[源代码]¶: A Float or a Complex specifying the load magnitude.

magnitudeState : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶: A SymbolicConstant specifying the propagation state of the load magnitude. Possible values are UNSET, SET, UNCHANGED, and MODIFIED.

status : --is-rst--:py:class:`~abaqus.UtilityAndView.SymbolicConstant.SymbolicConstant`[源代码]¶

A SymbolicConstant specifying the propagation state of the LoadState object. Possible values are:

NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
BUILT_INTO_BASE_STATE